Page 1 of 4 1234 LastLast
Results 1 to 10 of 37

Thread: Graphics Projector - by definition

  1. #1
    Bradfo69's Avatar
    Bradfo69 is offline Pending BST Forum Purchases: $47,127,283.53
    Join Date
    Jul 2010
    Location
    Wilmington, DE
    Posts
    6,207

    Default Graphics Projector - by definition

    I would be interested on hearing what people define as a "graphics only" projector and what you would require it to have. My intent for some time has has been to build a projector strictly for graphics. (Actually, join the ranks and build something...period.) Obviously, just about any projector can do both beam shows or graphics work but, I know there are some who refer to theirs as being strictly for graphics. Good quality scanners, tight beam specs, and wide range of color obviously are necessary. A beam beast can be more forgiving about some of this stuff, I know. But, what would you "insist" on. And, more importantly, based on my existing parts I've assembled below, what would you suggest for the red.

    I started with an Edison style case, a Stanwax ILDA safety board, a DZ color correction board, 3 axis newport dichro mounts, Laserwave dichros (25mm), obligatory keyswitch, emergency stop, stickers, etc., a 200mW CNI analog 473 (what started this whole mess), a 160mW analog CNI 532, and, I originally got DT40pros but, recently they're getting bumped to Eye Magic EMS7000's. I'm thinking about 200mW of 640 - perhaps Kvant. I know a graphics box doesn't need to be as powerful as a beam monster and I'm hoping 1/2 watt or so will be satisfactory. Everything is laid out and, nearly wired or, at least figured out what gets connected where. I haven't gotten the nerve to drill the first hole yet.

    Yes, I know I have a couple adequate projectors for graphics now but, I really want to have a go at the actual "building".

  2. #2
    Join Date
    Oct 2006
    Location
    Central Florida
    Posts
    7,067

    Default

    Jon's Spectra, PCAOM, CT6215s with the 60k amps...
    Love, peace, and grease,

    allthat... aka: aaron@pangolin

  3. #3
    Bradfo69's Avatar
    Bradfo69 is offline Pending BST Forum Purchases: $47,127,283.53
    Join Date
    Jul 2010
    Location
    Wilmington, DE
    Posts
    6,207

    Default

    Get right on that!

  4. #4
    Join Date
    Jul 2010
    Location
    Netherlands
    Posts
    3,322

    Default

    Quote Originally Posted by allthatwhichis View Post
    Jon's Spectra, PCAOM, CT6215s with the 60k amps...

    I'm curious, how big is this projector?

  5. #5
    Join Date
    Nov 2007
    Location
    SoCal / San Salvador / NY
    Posts
    4,018

    Lightbulb

    Heya Sire -

    Quote Originally Posted by Bradfo69 View Post
    I would be interested on hearing what people define as a "graphics only" projector and what you would require it to have.
    Really, you've got all the 'building-blocks' you need - high-speed galvos, w/ as-small-as mirrors as your beam will fit-onto, and, as 'HQ', (beam-specs-wise) and as hi-speed-modulatable lasers as you can afford, ie: direct-diode is preferable to DPSS, and vertical-cavity DPSS, is preferable to linear... reason-being, the better mod-linearity with v-cel, for-better 'shading' / blending, and color-subtleties, ie: when doing abstracts / rasters...

    Of course, OPSLs and, next, PCAOMs will trump v-cels, for speed - just look at the 'liquidity' of the color mods in this shot...
    https://fbcdn-sphotos-a.akamaihd.net...44211609_n.jpg
    ..but superior PCAOM-results can really only appreciated by *cough, cough* Ion owners *cough, cough*

    But, even if you can't afford super hi-speed galvos or v-cel DPSS, etc, prolly the most-important aspect for a graphics-projector - imho - is access to convergence-adjustments so you can *keep* your nice mixed-colors, spot-on - If you've got a 'sealed-box', external-access to those MM-1s is a *must* for ease of use, on-site...I don't care *what* ∆r¢tøs-salespeople say mounts do drift, with internal and external temp-influences, and you'll thank yourself, later, if your design has externally-tweekable combiner mounts - ie: the wonderful, wonderful 'vertical-drive' Thorlabs or Newport puppies, ie:

    http://www.newport.com/HVM-Series-Ve...1033/info.aspx -
    http://www.thorlabs.us/NewGroupPage9...ctGroup_ID=227 - personally, I prefer the Thorlabs, cause you can more-easily create a 'slot' in the adjustment knob, for tweekage with a pot-adjuster or small flat-head...

    ...Göod, for now?

    Quote Originally Posted by masterpj View Post
    I'm curious, how big is this projector?
    Oh, pretty small...

    DSLS_GX2_front.jpgDSLS_GX2_rear.jpg ...this is an 'in-studio-only' programming / demo rig... does not go on the road... But, Sir Evil has got that one beat by a factor of WOW...

    http://www.photonlexicon.com/forums/...926#post191926 - ..like 5" x 7" or something insane... no, wait... 'sick'

    Anyhoo, you can make these pretty-kompact...

    ciao..
    j
    ....and armed only with his trusty 21 Zorgawatt KTiOPO4...

  6. #6
    Join Date
    Jul 2010
    Location
    Netherlands
    Posts
    3,322

    Default

    Quote Originally Posted by dsli_jon View Post
    Heya Sire -



    Really, you've got all the 'building-blocks' you need - high-speed galvos, w/ as-small-as mirrors as your beam will fit-onto, and, as 'HQ', (beam-specs-wise) and as hi-speed-modulatable lasers as you can afford, ie: direct-diode is preferable to DPSS, and vertical-cavity DPSS, is preferable to linear... reason-being, the better mod-linearity with v-cel, for-better 'shading' / blending, and color-subtleties, ie: when doing abstracts / rasters...

    Of course, OPSLs and, next, PCAOMs will trump v-cels, for speed - just look at the 'liquidity' of the color mods in this shot...
    https://fbcdn-sphotos-a.akamaihd.net...44211609_n.jpg
    ..but superior PCAOM-results can really only appreciated by *cough, cough* Ion owners *cough, cough*

    But, even if you can't afford super hi-speed galvos or v-cel DPSS, etc, prolly the most-important aspect for a graphics-projector - imho - is access to convergence-adjustments so you can *keep* your nice mixed-colors, spot-on - If you've got a 'sealed-box', external-access to those MM-1s is a *must* for ease of use, on-site...I don't care *what* ∆r¢tøs-salespeople say mounts do drift, with internal and external temp-influences, and you'll thank yourself, later, if your design has externally-tweekable combiner mounts - ie: the wonderful, wonderful 'vertical-drive' Thorlabs or Newport puppies, ie:

    http://www.newport.com/HVM-Series-Ve...1033/info.aspx -
    http://www.thorlabs.us/NewGroupPage9...ctGroup_ID=227 - personally, I prefer the Thorlabs, cause you can more-easily create a 'slot' in the adjustment knob, for tweekage with a pot-adjuster or small flat-head...

    ...Göod, for now?



    Oh, pretty small...

    DSLS_GX2_front.jpgDSLS_GX2_rear.jpg ...this is an 'in-studio-only' programming / demo rig... does not go on the road... But, Sir Evil has got that one beat by a factor of WOW...

    http://www.photonlexicon.com/forums/...926#post191926 - ..like 5" x 7" or something insane... no, wait... 'sick'

    Anyhoo, you can make these pretty-kompact...

    ciao..
    j
    So whats the pricing on a unit? (not including scanners)

  7. #7
    Join Date
    Nov 2007
    Location
    SoCal / San Salvador / NY
    Posts
    4,018

    Default

    Quote Originally Posted by masterpj View Post
    So whats the pricing on a unit? (not including scanners)
    Sorry, Peej - you've got to narrow it down, a bit... Please define 'a unit' - a Projector for an Ion, w/ PCAOM? An RGB? OPSL? LMNOP??

    cheers..
    j
    ....and armed only with his trusty 21 Zorgawatt KTiOPO4...

  8. #8
    Join Date
    Apr 2006
    Location
    Miami, FL
    Posts
    3,590

    Default

    Quote Originally Posted by Bradfo69 View Post
    I would be interested on hearing what people define as a "graphics only" projector and what you would require it to have. My intent for some time has has been to build a projector strictly for graphics. (Actually, join the ranks and build something...period.) Obviously, just about any projector can do both beam shows or graphics work but, I know there are some who refer to theirs as being strictly for graphics. Good quality scanners, tight beam specs, and wide range of color obviously are necessary. A beam beast can be more forgiving about some of this stuff, I know. But, what would you "insist" on. And, more importantly, based on my existing parts I've assembled below, what would you suggest for the red.

    I started with an Edison style case, a Stanwax ILDA safety board, a DZ color correction board, 3 axis newport dichro mounts, Laserwave dichros (25mm), obligatory keyswitch, emergency stop, stickers, etc., a 200mW CNI analog 473 (what started this whole mess), a 160mW analog CNI 532, and, I originally got DT40pros but, recently they're getting bumped to Eye Magic EMS7000's. I'm thinking about 200mW of 640 - perhaps Kvant. I know a graphics box doesn't need to be as powerful as a beam monster and I'm hoping 1/2 watt or so will be satisfactory. Everything is laid out and, nearly wired or, at least figured out what gets connected where. I haven't gotten the nerve to drill the first hole yet.

    Yes, I know I have a couple adequate projectors for graphics now but, I really want to have a go at the actual "building".
    I would advise you to avoid 473 as it does not modulate well... jellybeans a lot etc

    get a 445 optically corrected and put it through a pinhole to get a nice round beam...

    or if you like setting money on fire get a 457nm laser

  9. #9
    Bradfo69's Avatar
    Bradfo69 is offline Pending BST Forum Purchases: $47,127,283.53
    Join Date
    Jul 2010
    Location
    Wilmington, DE
    Posts
    6,207

    Default

    I DO need to stand corrected, in that the 473 is a Laserwave and not a CNI but, nonetheless, it was buying 473 that got me thinking about this in the first place. Actually, it was getting a 100mW that started the planning but, then a few weeks later, getting a deal on a 200mW changed the power search for everything else to match with it. What I've heard from a few people though is that, 473 gives you better colors (or at least more realistic colors) than 445. idk...

  10. #10
    Join Date
    Apr 2006
    Location
    Miami, FL
    Posts
    3,590

    Default

    well, yes and no, a lot of shows were programmed with 473/488 light blue in mind for the "blue", so if you play those old shows they may look "wrong"... if you make your own shows this won't matter

    but having a darker blue (445) will give you more color depth since its a deeper blue, so you can mix it with some green to get lighter blues etc.. but you cant mix light blue with anything to get deep blue

    same would in theory apply to red, although its harder to see, but getting 1W of 660 would be better since its deeper than the 642... deeper colors = wider color gamut

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •