And, here is the "yes, but..." to follow that. I understand the darker blue is going to be better for giving a larger, more complete palatte, just as 660 allows for deeper reds but... where does beam spec and brightness come into play with that? 473 should generally be "tighter" than 445 just as 640 should be a lot "tighter" than 650 or 660. Correct? And, for graphics, don't you want the beam diameter as small as possible so the drawn lines are as sharp as possible?
Then with brightness... for beams, I know it takes a lot more 660 power to match the perceived brightness of 640. Does the same hold true for graphics though? I know you've mixed several wavelengths in your projector in order to saturate color to a degree but, if you've got a crap ton of power at 405 and 660, mixed with reasonable 532 aren't you (in theory) really covering everything? And, I guess there's always the issue of what's best for making white, "white"?
In answer to my original question though, should I take your answer as you would go 1 watt of 660 to mix with 200mw 473 and 160 of 532?
beam specs of opnext 637 / 640 and Loc 815, 826, 836 are very very similar.
so you can get a quad 660, using short FL lenses(like the optima) and then apply a reverse telescope with a ratio of 2.5-3:1 to get a 2mm beam with a 1,5 mrad divergence. a perfect match for the dpss
so, to me, 660 is very much ok for graphics. or you can build a quad with 3x660 and 1x640 diodes and one of badpip's drivers, to have the best of both worlds (and make your adjustments in software)
or you can just weight all these costs (modules, dichros, alignment, time etc etc) and get a multiline argon like the one DZ got...
"its called character briggs..."
Projector with PCAOMone that is really good for graphics but also decent in size.
OPSL are often high power and super expensive... at least thats what I keep seeing.
Last edited by masterpj; 11-21-2011 at 07:12.
LOL! See signature!prolly the most-important aspect for a graphics-projector - imho - is access to convergence-adjustments so you can *keep* your nice mixed-colors, spot-on![]()
Yeah, it's easy to say 'pretty small' when you don't count the large frame tube that's supposed to be attached to it!
Without that, it pretty much boils down to a PCAOM + driver and a set of scanners. Hey guys, I can make your car pretty small too, just need to chop off the front with the engine and remove the wheels...![]()