Page 1 of 3 123 LastLast
Results 1 to 10 of 27

Thread: RGB laser recommendations for £2000

  1. #1
    Join Date
    Jul 2009
    Location
    Essex, UK
    Posts
    53

    Default RGB laser recommendations for £2000

    I am looking to find out what people would recommend for RGB lasers to go in my projector.

    I am wanting to get:
    637nm - 600mw
    532nm - 500mw
    445nm - 500mw

    I have read so many conflicting stories about one make or another in that the quality isn't very good on quad diodes, or beams wandering off etc and if I am to believe everything I am reading, everything has 1 problem or another so my question is, for £2000 does anyone have any recommendations?

    I will be using DT40's and FB3 and will be using it for both graphics and beams.

    Thanks guys, appreciate any help, my brain is starting to hurt with all this planning!

    Andy

  2. #2
    Join Date
    Feb 2008
    Location
    East Sussex, England
    Posts
    5,248

    Default

    Get a bigger blue if you want a good white balance.
    Frikkin Lasers
    http://www.frikkinlasers.co.uk

    You are using Bonetti's defense against me, ah?

    I thought it fitting, considering the rocky terrain.

  3. #3
    Join Date
    Jul 2009
    Location
    Essex, UK
    Posts
    53

    Default

    Well aparantly with only 600mw of 637 the blue and green are already over powered for a good white?

  4. #4
    Join Date
    Jan 2007
    Location
    Yorkshire, UK
    Posts
    4,584

    Default

    Hi Andy

    Best suggestion I could give is to plan a trip up to the upcoming UKLEM in February. There'll be advice a plenty and you can see other people's rigs first hand to get an idea as to what you'd prefer for yourself.

    Cheers

    Jem
    Quote: "There is a theory which states that if ever, for any reason, anyone discovers what exactly the Universe is for and why it is here it will instantly disappear and be replaced by something even more bizarre and inexplicable. There is another that states that this has already happened.”... Douglas Adams 1952 - 2001

  5. #5
    Join Date
    Dec 2008
    Location
    veenwouden
    Posts
    2,579

    Default

    My suggestion would be a good solid case and some heavy powersupplies so that when you upgrade in the future you only have to swap the modules instead of rebuilding the whole projectors. I would recommend 1 watt 445 and and 500mw of green and a 658 module with good specs that you can upgrade to 637nm when you do lasershows and make money. The red is less important in the beginning. Red is expencive and with 658nm you can reduce the cost for the red.

  6. #6
    Join Date
    Aug 2008
    Location
    UK
    Posts
    5,704

    Default

    I would stick with what you've got but upgrade the blue to 1W (the difference is negligible as blue is so cheap - in fact on Kvant modules 500mw & 1W 445nm are actually the same price!).

    The line up you will have then almost mirrors the Kvant 2W projector which is:

    1W 445
    500mw 532
    680mw 637

    I'm not saying that's perfect, but in you're in ball park with which to start software tweaking.

    Amongst modules Kvant and RGB Laser Systems come highly recommended. Laserwave used to although I don't know what they're like these days. However, you can have a problem with any module as my recent Kvant red outage shows. Sometimes is juts bad luck. However, sticking with a known quality brand will go a long way to reducing the chances and Kvant and RGB are amongst the best and Laserwave certainly used to be good.

  7. #7
    Join Date
    Dec 2008
    Location
    veenwouden
    Posts
    2,579

    Default

    Well I don,t agree with sticking with the familiar brands like RGB and Kvant. First of all Kvant has a divergence of 0.8mrd but stated in half angle so actually they divergence is 1.6mrd for their reds. The reds that i build have 0.65mrd at full angle and the stabilty in allignment is better the a kvant. Also bigger companies are not so flexible if you want something els like. Also a 680mw/637 is 1012 pounds and that is already more then half your budget. Start with a good green and blue with low divergence. Low divergence means higher visability. You want to do graphics also and that means a low divergence is nessesary And a good quality case. Preferable a splitlevel design. Its better the have a good quality green/ blue projector and ad red later then start with an RGB and found out that you could have done better

  8. #8
    Join Date
    Jul 2009
    Location
    Essex, UK
    Posts
    53

    Default

    Quote Originally Posted by edison View Post
    My suggestion would be a good solid case and some heavy powersupplies so that when you upgrade in the future you only have to swap the modules instead of rebuilding the whole projectors. I would recommend 1 watt 445 and and 500mw of green and a 658 module with good specs that you can upgrade to 637nm when you do lasershows and make money. The red is less important in the beginning. Red is expencive and with 658nm you can reduce the cost for the red.
    Cheers Edison, I've looked at the higher wavelength reds but wouldn't I need 1.2w-1.5w for it to match the blue and green and isn't the beam really fat for graphics?

    On the subject of power supplies, is it possible to power all the drivers from 1 psu? I know its not ideal for redundancy but I won't be having any paying guest viewing it so it won't matter.

    Quote Originally Posted by White-Light View Post
    I would stick with what you've got but upgrade the blue to 1W (the difference is negligible as blue is so cheap - in fact on Kvant modules 500mw & 1W 445nm are actually the same price!).

    The line up you will have then almost mirrors the Kvant 2W projector which is:

    1W 445
    500mw 532
    680mw 637

    I'm not saying that's perfect, but in you're in ball park with which to start software tweaking.

    Amongst modules Kvant and RGB Laser Systems come highly recommended. Laserwave used to although I don't know what they're like these days. However, you can have a problem with any module as my recent Kvant red outage shows. Sometimes is juts bad luck. However, sticking with a known quality brand will go a long way to reducing the chances and Kvant and RGB are amongst the best and Laserwave certainly used to be good.
    I've heard that the higher power quad kvants have beam wandering issues as does laserwave, then again everything I am reading seems to indicate everything has issues!

    Quote Originally Posted by edison View Post
    Well I don,t agree with sticking with the familiar brands like RGB and Kvant. First of all Kvant has a divergence of 0.8mrd but stated in half angle so actually they divergence is 1.6mrd for their reds. The reds that i build have 0.65mrd at full angle and the stabilty in allignment is better the a kvant. Also bigger companies are not so flexible if you want something els like. Also a 680mw/637 is 1012 pounds and that is already more then half your budget. Start with a good green and blue with low divergence. Low divergence means higher visability. You want to do graphics also and that means a low divergence is nessesary And a good quality case. Preferable a splitlevel design. Its better the have a good quality green/ blue projector and ad red later then start with an RGB and found out that you could have done better
    OK, what is the divergence that I want to be looking for; what is ideal?...and I'll see how close I can get with my budget.

    I can't seem to find anywhere in the UK that makes a case that would be suitable, I was thinking of getting some alu plate and riveting my own?


    Appreciate your help guys.

  9. #9
    Join Date
    Jul 2009
    Location
    Essex, UK
    Posts
    53

    Default

    Quote Originally Posted by Jem View Post
    Hi Andy

    Best suggestion I could give is to plan a trip up to the upcoming UKLEM in February. There'll be advice a plenty and you can see other people's rigs first hand to get an idea as to what you'd prefer for yourself.

    Cheers

    Jem

    I was looking at doing that Jem but I don't really have anything to offer, I mean I don't have any technical knowledge to share with anyone there. I don't want to come off as a leech?!
    Last edited by anderino; 01-15-2012 at 08:32. Reason: forgot quote

  10. #10
    Join Date
    Dec 2006
    Location
    Essex, UK
    Posts
    8,647

    Default

    Where in Essex are you
    Eat Sleep Lase Repeat

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •