Page 3 of 4 FirstFirst 1234 LastLast
Results 21 to 30 of 31

Thread: How to spend $30,000

  1. #21
    Join Date
    Aug 2008
    Location
    UK
    Posts
    5,704

    Default

    Quote Originally Posted by Aage View Post
    Most likely they've sourced cases either from Kvant themselves or from their supplier as I doubt Kvant manufacture their own cases on site.

  2. #22
    Join Date
    Aug 2008
    Location
    UK
    Posts
    5,704

    Default

    Jon I think the OP said the pyro guy is looking for outdoor lasers, is 2-3w rgb going to cut it?
    Last edited by White-Light; 01-20-2012 at 15:56.

  3. #23
    Join Date
    Dec 2008
    Location
    veenwouden
    Posts
    2,579

    Default

    I build ocassionally the ones on the picture. I have developed my own lasers but brightred is still in development. That means the driver isn,t ready yet to protect the diodes against overheating. And when for some reason it gets to hot and the diodes died i need to replace them. For outdoor events 660 isn,t an option i think.

    I have blue,s up til 8 watt. The red should be an RGBlasersystems module in my opinion. Scanners should eyemagics. I would go for a little more blue since this will give you an awesome cyan and its very suitable for outdoor because of the brightness. Low divergence is more bright to the eye and that is important.


    Because service is important too go with someone who is willing to spend extra time and effort when needed. Buying a system is one thing, but service is another. When having a system it not the end of the story. When something goes wrong you want someone who cares about helping you out no matter what, even if it cost him money when its not his fault.

    Oh by the way loved your country!!! I been there 8 months in 2007. Loved the people very friendly and helpfull
    Attached Images Attached Images

  4. #24
    Join Date
    Feb 2011
    Location
    New Hampshire
    Posts
    3,513

    Default

    Jon,
    I'm wondering if you have thought about the appeal of a VERY powerful projector for aerial shows? The manufacturers discussed so far, do produce high power units that at the limit of the budget will provide 15W, but the system your working on will far exceed this. What about a moderate RGB with a couple green satellites along with a big single red/green/blue for primarily outdoor use? Hmmm

  5. #25
    Join Date
    Nov 2007
    Location
    SoCal / San Salvador / NY
    Posts
    4,018

    Default

    Quote Originally Posted by White-Light View Post
    ...is 2-3w rgb going to cut it?
    Thanks fer the nudge, m8, but I was saying 2-3W for *graphics* (..and, 'supplementary', at-that.. not 'center-stage' / star of the sho, for that-big of a crowd, especially with-pyro, etc.. ) but yeah, at least 5-8W of GBC, for aerials... If, however, Sir vIQleS knows that he / they will *never* need to do graphics, then, yes - pump every-last allotable-dime into as much power / brightness for your aerials-rigs as ya can... and - as the 'Doublemint twins' have well-taught-us - 'two are always better than one'...

    Quote Originally Posted by planters View Post
    I'm wondering if you have thought about the appeal of a VERY powerful projector for aerial shows?...
    Oh, Sire - have waaay-more-than 'thought' about it... we're in-production, mama!... Prelim-tests suggest better-than 45W of RGB, but... we'll see what the 'real-world' has to say about it, when all is done / working in-harmony, soon... Follow this thread in the coming-months...

    Now back to, uh... Sir vIQleS' thread...
    cheers..
    j
    ....and armed only with his trusty 21 Zorgawatt KTiOPO4...

  6. #26
    Join Date
    Mar 2007
    Location
    Rotorua New Zealand
    Posts
    528

    Default

    Hi guys,
    I have invited him to come down to Rotorua about two and half hours from me. He can then have look at various lasers and systems. QM2000 etc etc..
    I can also show him .net in action. His budget may sound quite grand but given the state of the NZ dollar and that he needs the "complete" picture it may not be such a grand budget.
    Cheers
    Ray NZ

  7. #27
    Join Date
    Aug 2008
    Location
    UK
    Posts
    5,704

    Default

    I just did a quick conversion, its still Euro 18,600.

    That should buy the top Beyond / LD package with a QM .net & leave around Euro 15K for a projector.

    Euro 15,000 should buy quite a serious projector.

  8. #28
    Join Date
    Jan 2007
    Location
    Yorkshire, UK
    Posts
    4,584

    Default

    Hi Ray

    Not seen you around for a while. Hope everything's well.

    Cheers

    Jem
    Quote: "There is a theory which states that if ever, for any reason, anyone discovers what exactly the Universe is for and why it is here it will instantly disappear and be replaced by something even more bizarre and inexplicable. There is another that states that this has already happened.”... Douglas Adams 1952 - 2001

  9. #29
    Join Date
    Nov 2005
    Location
    Melbourne, Australia
    Posts
    3,702

    Default

    Quote Originally Posted by White-Light View Post
    Euro 15,000 should buy quite a serious projector.
    Indeed, a very serious projector.
    KVANT Australian projector sales
    https://www.facebook.com/kvantaus/

    Lasershowparts- Laser Parts at great prices
    https://www.facebook.com/lasershowparts/

  10. #30
    Join Date
    Mar 2007
    Location
    Rotorua New Zealand
    Posts
    528

    Default

    Hi Jem.. Good to hear from you. Yep still around haven't been on much as I had busy year. Getting a few laser shows. I did one for the World Rugby cup large audience.
    One of those rare chances to have total darkness... It went down real well. Doing another event in a week or so.

    Dave , good to hear, I guess what I am saying is he needs to asses the whole job not just the laser head.
    I am sure he will get a good system for the dollars available but if he gets the wrong gear we all know where that ends up. Anyway it's his call I have made the offer for him to visit and discuss his possible options.

    Cheers

    Ray
    NZ

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •