The tubes are all intact, but for all except me (and maybe a couple others), this laser isn't worth storing or moving, much less repairing. Four of us couldn't lift that power supply!
The tubes are all intact, but for all except me (and maybe a couple others), this laser isn't worth storing or moving, much less repairing. Four of us couldn't lift that power supply!
The public record for commercial power is 300 mW of 6328. A chinese "V" folded tube design with elliptical bores. The HENE gains its reset to ground state using wall collisions. So if you make the bores wide and flat, you get more wall collisions, and you can get more power.
The downside of the wide and flat bores is a horrible beam shape, but it still has good divergence.
The thing was less then 30" long, and did 300 mW.
IMHO:
It would have made it in the US as a useful technology, but the Chinese hired a university not known as a technology school, to do their marketing. Suffice it to say it was probably not marketed properly. They tried to sell it as a one off 20,000$ a piece unit. At a time when you could get 4 125's refurbed for that, the medical community did not bite. Still made "on demand" in China.
The target market was photodynamic cancer treatments, and 633 nm diodes did not exist yet. So it would have sold, had it not been marketed as a "Golden Calf". It did not help that it was sold in a blue, wooden, case that looked like a old foot pedal sewing machine.
I can link the patent, but it would take time to look up.
Bummer, because 300 mW of non-diode 633 would have been a beautiful sight, in the snow here.
Steve
Last edited by mixedgas; 06-19-2012 at 08:19.
Thanks Steve. The highest power for He-Ne I've seen referenced is 1W at Bell Labs, but that wasn't commercial. But I said the "biggest", not the most powerful!![]()
HeNe lasers are alive and well in 2012. Amen. A new 25-LHP-928 will output 45 mW and is light weight and has a zero leak tube with "infinite" storage time and a 40K hour life to 35 mW. No SP 125A but still a nice laser.
Phil Bergeron( AKA 142laser)
If you want the current "Longest Cavity", its 4 meters on a side, square ring, in Germany. It only has a 100 nanowatts of output though, as its a ring laser gyro. #2 is 1.6 meters on a side, and in New Zealand. 4 meter ring, but only needs 10 cm of active length... The joys of supermirrors...
Steve
But those are devices with lasers inside, not lasers per se.
Not really, its one big laser. They dont like the time distortions caused by brewster windows, so the laser tube is 18.4 meters long, and filled with the He-Ne mix in the non-active regions. Even the mirrors at the corners are "in the tube" so to speak. The active discharge is 10 cm.
While there are folded CO2s with 6 tubes in industrial service, its safe to say that beast is world's longest active visible laser right now.
When they scrap this one, and they will soon, you'll need a bigger garage, when you buy it. Gotta love the Zerodur blocks on the telescope mirror blank, holding the cavity
http://en.wikipedia.org/wiki/Ring_Lasers_for_Research
Steve
Last edited by mixedgas; 06-20-2012 at 09:03.
OK, maybe not the most powerful or the biggest, but still a whopper. Anyway, I finally got around to cleaning 45 years of dust out of the power supply so here's a pic inside. I love that huge vacuum tube in the modulation section.
H-Nu Power Supply.jpg
Jeeze. That PSU could probably source 300 mA or more.
NOT a small hene psu.
Probably could run something larger and pulsed.
Steve
And a final picture, of the power supply front panel. Pulsed and CW operation.
H-Nu Power Supply Front Panel.jpg