Page 2 of 3 FirstFirst 123 LastLast
Results 11 to 20 of 27

Thread: 1w 525 di ?

  1. #11
    Join Date
    Jun 2010
    Location
    Syracuse, NY
    Posts
    287

    Default

    This is definitely exciting! But I am curious as well about the 1W red that was mentioned. Can the P73 be pushed that high reliably or were they referring to a different diode that I'm not aware of? Or was it possibly just a slight exaggeration? Either way, I think I still have just enough time to get comfortable tweaking my current projector project to be ready for another go at it when these greens become available
    LASERS!!

    1x Homemade 500mW 405nm Projector
    1x Homemade 1.2W RGB Projector
    1x Lightspace Color Ray Series 6W RGB
    2x Lightspace Venus 2W RGB

    ZPL Lighting www.zpllighting.com

  2. #12
    mixedgas's Avatar
    mixedgas is offline Creaky Old Award Winning Bastard Technologist
    Infinitus Excellentia Ion Laser Dominatus
    Join Date
    May 2007
    Location
    A lab with some dripping water on the floor.
    Posts
    10,114

    Default

    The system the new diodes are in uses red LEDs.

    Steve

  3. #13
    Join Date
    Jan 2007
    Location
    Florida
    Posts
    4,382

    Default

    Quote Originally Posted by ZeroPoint View Post
    Can the P73 be pushed that high reliably or were they referring to a different diode that I'm not aware of?
    I push the P73 diodes at slightly above 800ma producing around 600 mw out. I don't expect an extremely long lifetime from them tho ..

  4. #14
    Join Date
    Apr 2010
    Location
    Grand Rapids, Mi
    Posts
    2,538

    Default

    Quote Originally Posted by steve-o View Post
    I push the P73 diodes at slightly above 800ma producing around 600 mw out. I don't expect an extremely long lifetime from them tho ..
    If TEC cooled they can, I run the P73 at 1W with no issues. I had it run at this with no degradation for 5 straight days. I have a thread somewhere with this info. basically the diode is rated at 1W pulsed, so I think if you keep it cool there are not many issues at that power. I had a single at SELEM that a lot of people saw running 1W after correction optics, also had a Dual in my projector doing 1.8W after all optics.
    leading in trailing technology

  5. #15
    Join Date
    Jan 2006
    Location
    Charleston, SC
    Posts
    2,147,489,632

    Smile

    Quote Originally Posted by WookieBoy View Post
    I thought the p71/g73 were 500mW or 750mW respectively?
    G71 is 300 mw, P73 is 500 mw. But with proper TEC cooling, you can double those figures. (See below)
    Quote Originally Posted by ZeroPoint View Post
    I am curious as well about the 1W red that was mentioned. Can the P73 be pushed that high reliably
    Yes, they can. Though as mixedgas pointed out, the projector will be using an LED for red, not laser diodes.
    Quote Originally Posted by polishedball View Post
    I run the P73 at 1W with no issues. I had it run at this with no degradation for 5 straight days.
    I had a single at SELEM that a lot of people saw running 1W after correction optics, also had a Dual in my projector doing 1.8W after all optics.
    I can vouch for this. I spent a good deal of time looking at these two lasers at SELEM.

    In fact, John's design for the P73 running at 1 watt is integral to the PL-Spec projector project that we are working on. (Due in no small part to my utter amazement at seeing it run for pretty much the entire day at SELEM at full power without failure.) Note that this design also uses the awesome hand-machined optic mounts that Bob (CD-Beam) created.

    Bottom line: keep a P73 cool and with the proper lenses you can get a very nice looking 1 watt beam after all correction optics.

    Adam

  6. #16
    Join Date
    Jan 2007
    Location
    Florida
    Posts
    4,382

    Default

    Quote Originally Posted by buffo View Post
    Bottom line: keep a P73 cool and with the proper lenses you can get a very nice looking 1 watt beam after all correction optics.

    Adam
    That's awesome. Do you use a closed-loop TEC cooling system w/PID or similar?

  7. #17
    Join Date
    Jan 2006
    Location
    Charleston, SC
    Posts
    2,147,489,632

    Smile

    Quote Originally Posted by steve-o View Post
    That's awesome. Do you use a closed-loop TEC cooling system w/PID or similar?
    Hey Steve-o;

    It's not my design. John (Polishedball) is the one who built it. I'm almost positive it's closed loop, but I don't think it's a true PID controller. (There are many ways to close the loop without resorting to true integral, differential, and gain adjustments.)

    That being said, it did have a big honkin' heat sink on the back... Wish I had pictures of the thing running at SELEM, but I didn't take any pics this year. (Too busy doing other stuff!) But I'm sure John will chime in here with his details soon enough.

    Note that I have been offered a true PID-capable TEC controller design for use in the PL-Spec projector project, but I'm worried that production of the controller might break the budget. I need to see how cheaply I can get them made before I include it in the design. The guy that designed it is getting very precise temperature control with it (+/- .1 degree or better), so it would be great to have if we can afford it.

    Adam

  8. #18
    Join Date
    Jan 2007
    Location
    Peking
    Posts
    1,207

    Default

    I am interesting when they will had engineering samples?
    For quantity using or prices down to we can accept, I bet it is 2015 year. you thought?
    Laser-wave can supply:
    Green 532nm, 4W, 10W, 15W
    blue 445nm, 2W, 3.5W, 6W, 10W
    blue 462nm, 2W
    Red 638nm, 500mW, 1W,2W, 4W, 5W, 6W, 8W, 10W
    All diodes, All optics, All mount, All laser base and housing for yourselves building lasers.
    Speical products, 532nm, OEM-V-SS, 4W, 98mm*46mm*48mm; OEM-H, 10W, 250mm*88mm*70mm
    www.laser-wave.com or www.laser-wave.net
    bridge@laser-wave.com or 463366312@qq.com
    We Chat: 463366312, Laserwave-Bridge

  9. #19
    Join Date
    Oct 2010
    Location
    Athens, Greece
    Posts
    1,930

    Default

    well bridge, 2015 is as good an estimate as the next one

    What worries me is the quantity of diodes a laserTV uses.
    I guess it is ok to use 24blue in a video projector, but maybe much less diodes are needed for a laserTV, thus keeping prices too high, even harvested
    "its called character briggs..."

  10. #20
    mixedgas's Avatar
    mixedgas is offline Creaky Old Award Winning Bastard Technologist
    Infinitus Excellentia Ion Laser Dominatus
    Join Date
    May 2007
    Location
    A lab with some dripping water on the floor.
    Posts
    10,114

    Default

    You guys are assuming way too much about the design of this new system. It has to have some other changes in it. More along the lines what some of us have gently warned you about. The physics of die design requires it. Even when you do get these new diodes, you will find that they are more optimized this time for video projectors, and less like narrow beam lasers. The corrective optics thread is going to get far, far, longer.

    Basic "Industrial Evolution" will apply.


    Steve
    Last edited by mixedgas; 11-29-2012 at 04:58.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •