Results 1 to 6 of 6

Thread: Need some info on Laser control cables

  1. #1
    Join Date
    Jul 2011
    Location
    Olympia, Washington
    Posts
    67

    Default Need some info on Laser control cables

    I have a question on ILDA control cables. My question is, Does anyone know if they use all the 25 pins in the cables? I have seen some plugs that will go from the 25 pin connectors to Ethernet cables then back to the 25 pin connector at the other end. If so, does that work on all DACS and ILDA Lasers?

  2. #2
    swamidog's Avatar
    swamidog is offline Jr. Woodchuckington Janitor III, Esq.
    Join Date
    Nov 2006
    Location
    santa fe, nm
    Posts
    1,545,835

    Default

    here's a good link for the db25 pin usage:

    http://www.laserfx.com/Backstage.Las.../Pinouts9.html

    Quote Originally Posted by A1pyro View Post
    I have a question on ILDA control cables. My question is, Does anyone know if they use all the 25 pins in the cables? I have seen some plugs that will go from the 25 pin connectors to Ethernet cables then back to the 25 pin connector at the other end. If so, does that work on all DACS and ILDA Lasers?
    suppose you're thinkin' about a plate o' shrimp. Suddenly someone'll say, like, plate, or shrimp, or plate o' shrimp out of the blue, no explanation. No point in lookin' for one, either. It's all part of a cosmic unconciousness.

  3. #3
    Join Date
    Jul 2011
    Location
    Olympia, Washington
    Posts
    67

    Default

    This is what I saw and was wondering about. Do you know if this will work?

    http://www.ebay.com/itm/ILDA-UTP-ada...90755326173%26

  4. #4
    Join Date
    Dec 2006
    Location
    Scotland
    Posts
    1,408

    Default

    Sorry this is going to sound a tad sarcastic , but the clues in the auction title :-)

    "ILDA to UTP adapter for lasershows (Use network cable instead of ILDA cable "

    Looks ideal , but likely limited distance , im sure someone will come along and detail in due course , would be interesting to hear from
    someone with real world experience who has tested distances.

    There is an alternative I have used USB to CAT5 , worked but I did have trouble with setup ... which put me off.

    Also search rob stanwax discussions on this , im sure he has a rock solid solution using CAT5 , that also carries emergency stop
    signal , might even be available to purchase now from his website

    paul
    In the beginning there was none. Then came the light - #1 UKLEM - 2007
    BUY UK LEGAL LASER POINTER :: NEW - Blue 460nm Laser Pointers

  5. #5
    Join Date
    Feb 2010
    Location
    NJ
    Posts
    270

    Default

    Personally, I'd go with Stanwax. Someone here already reviewed his product, Laser Wizardry, I think. But here's the same adapter as on ebay for $1.60 each. http://www.computercablestore.com/Mo...FUVN4AodjS8AhQ

    Edit: You'll need to wire it, but it'll save you $30.
    CT Lasers Luminance RGB @ 3.09 watts
    (680mw 640, 960mw 532, 250mw 473, 1200mw 445, DT40W)
    FB3 w/ Beyond
    Second RGB in progress.

  6. #6
    Join Date
    May 2011
    Location
    Yorkshire, UK
    Posts
    39

    Default

    I've run CAT 5 with Rob's (Stanwax) at over 50m with no issues.

    Link: Stanwax ILDA CAT 5 Adaptor

    Benefit if doing same venues regularly is I've put cat5 in and just left it in for next time. Cat 5 also fits through smaller holes ( in walls )without rewiring than ILDA cables.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •