Page 1 of 2 12 LastLast
Results 1 to 10 of 14

Thread: unusual laser installation, haze question

  1. #1
    Join Date
    Dec 2007
    Location
    Stockholm, Sweden
    Posts
    556

    Default unusual laser installation, haze question

    Hi,

    I have been asked to research and prototype a bit for a possible laser installation.
    The installation consists of a clear plexiglass window (or actually several windows) with a shallow black box behind. Inside it is a classic laser "fan"-type effectpointing upwards, the beam termination can't be seen, just the fans through some smoke. So far so good, no problems.
    The thing is that it has to be a closed system, no smoke can escape into surrounding air!

    I tried a simple mockup using 12k scanners, 50mW 532nm laser, cardboard, a free running DMX-board and some plexiglass. And lots of scotch tape!
    I used a Thomann.de cheap hazer with a silicon hose for smoke delivery and a small computer fan to push the smoke up and make some movement. It worked surprisningly well, a very short burst of smoke sits for a very long time and produces a nice effect, like a rave in a picture frame!

    Here are pictures and videos of my tests.

    Earlier static beam, it's a real masterpiec of scrapheap engineering!


    With scanner:


    Video with lights on:
    https://www.youtube.com/watch?v=p4Ubjmf40bU

    Longer video with lights off:
    https://www.youtube.com/watch?v=Od40_hoMLA8



    I can have the designer make the cabinet almost airtight and I thought of having only one vent in the whole system let all air in & out pass through some type of air filter. Due to the very small amount of smoke it could work by using a slow moving computer fan to just circulate and add very little some every 10 minutes or so.
    Do you guys think it would work? The thing would be run for like 6 hours at a time tops.
    The only problem I can think of with the smoke/haze would be contamination of the acrylic windows, is that a problem you think?
    I am using glycerine smoke fluid, is ther other techniques to produce smoke that might be better for this?

    And no, lcd-screens with video is out of the question!

  2. #2
    Join Date
    Nov 2011
    Location
    Bedfordshire, UK
    Posts
    603

    Lightbulb

    Hi Dar.

    If the budget is there, look at the ViCount hazer. It's not cheap (see my other thread about it in group buys) but a small blast of haze could last the entire 6 hours the system will be running... but don't take that as fact, it could just be sales speak untill i get to properly test the unit out in a venue I can't verify the hang time ...so you could just use a tiny 20-50mm fan internally to give some movement of the air maybe, rather than having airflow through the cabinet?
    Also, the haze is much finer and almost no residue or dust, unlike glycol, so could remove some of the worries about leaky seals if it's in a museum or gallery type enviroment. (These machines are designed for testing airflow in clean-room enviroments aparently)

    Otherwise, whatever you do with a glycol based hazer, after a few days(maybe weeks if you're lucky) you'll most likely goingto have to break the enclosure down to clean the laser optics and the front viewing window...

    Hope that's helpful...
    If in doubt... Give it a clout?

  3. #3
    Join Date
    Sep 2006
    Location
    Netherlands
    Posts
    1,438

    Default

    You could attach some kind of tec cooled bottle to act as a getter.
    So the residu will end up / condensate in a predictable place you can empty periodically.

    Is a tank with a fluid with disolved stuff not an option ?

  4. #4
    Join Date
    Dec 2006
    Location
    denver,co
    Posts
    1,078

    Default

    Ultrasonic Humidifier.

    chad


    When the going gets weird, the weird turn pro.


  5. #5
    Join Date
    Oct 2012
    Location
    Shoeburyness, UK
    Posts
    20

    Default

    Would make excellent (if high maintenance) wall lights!

  6. #6
    Join Date
    Jan 2007
    Location
    Yorkshire, UK
    Posts
    4,584

    Default

    Quote Originally Posted by WookieBoy View Post
    If the budget is there, look at the ViCount hazer.
    Most folks would probably know this by its other more popular name which is the Pea Soup Phantom Hazer

    http://www.smokemachines.net/buy-pro-hazer.shtml

    Cheers

    Jem
    Quote: "There is a theory which states that if ever, for any reason, anyone discovers what exactly the Universe is for and why it is here it will instantly disappear and be replaced by something even more bizarre and inexplicable. There is another that states that this has already happened.”... Douglas Adams 1952 - 2001

  7. #7
    Join Date
    Feb 2010
    Location
    NJ
    Posts
    270

    Default

    If the box is relatively thin, how about filling it with some sort of clear gel or perhaps mount the laser under an aquarium filled with water? Any particular reason it needs to be filled with smoke or haze?
    CT Lasers Luminance RGB @ 3.09 watts
    (680mw 640, 960mw 532, 250mw 473, 1200mw 445, DT40W)
    FB3 w/ Beyond
    Second RGB in progress.

  8. #8
    Join Date
    Dec 2011
    Location
    luton
    Posts
    58

    Default

    Quote Originally Posted by WookieBoy View Post
    Hi Dar.

    If the budget is there, look at the ViCount hazer. It's not cheap (see my other thread about it in group buys) but a small blast of haze could last the entire 6 hours the system will be running... but don't take that as fact, it could just be sales speak untill i get to properly test the unit out in a venue I can't verify the hang time ...so you could just use a tiny 20-50mm fan internally to give some movement of the air maybe, rather than having airflow through the cabinet?
    Also, the haze is much finer and almost no residue or dust, unlike glycol, so could remove some of the worries about leaky seals if it's in a museum or gallery type enviroment. (These machines are designed for testing airflow in clean-room enviroments aparently)

    Otherwise, whatever you do with a glycol based hazer, after a few days(maybe weeks if you're lucky) you'll most likely goingto have to break the enclosure down to clean the laser optics and the front viewing window...

    Hope that's helpful...
    It may interest you to know we have had this hazer in hire stock for several years. It is excellent, and completely lives up to its "hype". we also have cracked oil and water based machines, and the viscount is the best. I am also based in Luton...

  9. #9
    Join Date
    Dec 2007
    Location
    Stockholm, Sweden
    Posts
    556

    Default

    Hi!

    Thanks for the tips! I'm actually looking at the ViCount/PeaSoup hazer, seems perfect!
    Also, a tec as a coldspot is pure genius if I was to use a ordinary hazer, must remember that trick!

    The buyers of this wanted it to be "real" with live laser and smoke, it would have been easier with a couple of LED TV's actually...

    I'll post more info if this gets off the ground, had a meeting with the architects and they will give me what I need to make this a closed system apparently.

    Now I need some good quality scanners, 12 or 20k will work fine and some sort of autoplay/DMX-board with audio input or mic. I will need this pretty from inside the EU fast if they want me to build it, any tips?

  10. #10
    Join Date
    Dec 2008
    Location
    Vezon, Belgium
    Posts
    1,017

    Default

    I'd use some clear resin with just a bit of something fluorescent inside, like a dissolved aspirin or something alike, cast between two plexiglas plates, and place plane mirrors at the sides of the apparatus to fill in a full plane

    you can even mix the additive unequally before pouring so you keep a "hazed" effect by unequal fluorescence... I'd test this in a small glass container

    maybe you can even find some cheap ant-farm like vivariums which would only be one inch thick or something alike...

    a polygonal mirror and a modulated laser would even make some kind of variable chess game pattern with the side mirrors... if you use more colors and separate modulation, you could even create a game by webcam and processing (credits to me for the invention )

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •