Results 1 to 8 of 8

Thread: Small little RGB Projector build advice

  1. #1
    Join Date
    Apr 2009
    Location
    Zürich-Bangkok-Dubai
    Posts
    275

    Laser Warning Small little RGB Projector build advice

    Hello All!

    I want to build one as my toy.

    Power does not concern me, but beam spec is my main goal.

    I was thinking of using all single mode diodes like for red 120mW Single Mode HL63603TG , Blue 80mW Single Mode PL450B, Small 50-100mW generic laser pointer extracted.

    So around 250-300mW RGB but a perfect beam,

    I have no Idea what lens should be used for the Single Mode Blue & Red diode.

    And Badpip 4Ch driver to drive all of them


    Any suggestion?


    Cheers!
    Philipp Wetter

  2. #2
    Join Date
    Apr 2009
    Location
    Zürich-Bangkok-Dubai
    Posts
    275

    Default

    Guys,


    This is my rough To Do shopping list for now :P


    Component Parts Price List


    Dave Laser Show Parts :

    Brass diode housing set for 3.8mm diodes 3Pcs $75

    Micro flexure mirror mount -standard size 3Pcs $54


    DTR Laser Shop :

    Opnext 120mW Single Mode 638 Diodes (HL63603TG) 1Pcs $32

    450nm Osram PL450B Diode 1Pcs $37

    PL520 3.8mm 50mW 520nm green laser diode 1Pcs $130


    Golden Star Laser :

    20K Galvo Kit 1Pcs $50

    Dichro Optics 3Pcs $6


    Tony Dunn :

    Aluminum Base Plate 1 Pcs $20

    Badpip 4CH Driver 1 Pcs $60


    Total ----------------

    $464

    Excluding Shipping cost & Lens for Diodes + $150

    I have got PSU and ilda port connector wires etc :P
    Philipp Wetter

  3. #3
    Join Date
    Dec 2012
    Location
    Norway, Stavanger
    Posts
    71

    Default

    Get the 30Kpps once.
    I got the 20k's and it was a big mistake to get them, 30K++ is advised
    1x - 2W RGB DT40Pro (Currently building)
    1x - 1W RGB PT25K
    ------------------------------------
    EtherDream, LaserShowExpress, Ipad (TouchOSC)
    -Hybridz0rz

  4. #4
    Join Date
    Apr 2009
    Location
    Zürich-Bangkok-Dubai
    Posts
    275

    Default

    Quote Originally Posted by hybridz0rz View Post
    Get the 30Kpps once.
    I got the 20k's and it was a big mistake to get them, 30K++ is advised

    Not a problem, whats wrong with yours? I have one 20K's from Spacelas they performed fine as a toy for a year now, I did notice tho that image is not so steady and would jitter very little from far distance, lets say its not that accurate.
    Philipp Wetter

  5. #5
    Join Date
    Dec 2012
    Location
    Norway, Stavanger
    Posts
    71

    Default

    Quote Originally Posted by JRGixxerfreaK1 View Post
    Not a problem, whats wrong with yours? I have one 20K's from Spacelas they performed fine as a toy for a year now, I did notice tho that image is not so steady and would jitter very little from far distance, lets say its not that accurate.
    Nothing is wrong with them, its just that the performance of a 30Kpps system will match more peoples systems and you will get much better performace on logos and the over all scan image
    1x - 2W RGB DT40Pro (Currently building)
    1x - 1W RGB PT25K
    ------------------------------------
    EtherDream, LaserShowExpress, Ipad (TouchOSC)
    -Hybridz0rz

  6. #6
    Join Date
    Apr 2009
    Location
    Zürich-Bangkok-Dubai
    Posts
    275

    Default

    Quote Originally Posted by hybridz0rz View Post
    Nothing is wrong with them, its just that the performance of a 30Kpps system will match more peoples systems and you will get much better performace on logos and the over all scan image

    True true true, might aswell get a 30K's :P
    Philipp Wetter

  7. #7
    Join Date
    Aug 2010
    Location
    Hungary
    Posts
    221

    Default

    I think about a bigger RGB projector ,it's optical out will be about >6W.
    Okay the R/B sources are solvable "for dirt cheap" (PBS+P73's ,many... and the 2W blue ones )but what about the green source?
    I think i"ll need 2 or more in W(atts) to get close to the balanced RGB.
    Is it possible to make by hands the green lazer from scratch or i have to buy it?
    I prefer CNI greenies
    Last edited by epyn; 05-18-2013 at 15:55. Reason: optionals and spelling

  8. #8
    Join Date
    Apr 2009
    Location
    Zürich-Bangkok-Dubai
    Posts
    275

    Default

    Epyn, I heard Laserwave OEM green are nice good modulation & small aswell!
    Philipp Wetter

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •