Page 2 of 4 FirstFirst 1234 LastLast
Results 11 to 20 of 36

Thread: Finally good Lumia video

  1. #11
    Join Date
    May 2007
    Location
    1 hr from everything in SoCal
    Posts
    2,833

    Default

    Quote Originally Posted by Displaser View Post
    Just to clarify, the "linear lumia" is produced with a torture/dimple tube - just a borosilicate glass tube that has been deformed around the circumference.
    I have MAP gas but I am not comfortable working with glass. I am curious how a polycarbonate or acrylic tube will work. I wonding how hard it will be to dimple without the plexi bubbling.
    If you're the smartest person in the room, then you're in the wrong room.

  2. #12
    Join Date
    Apr 2010
    Location
    Grand Rapids, Mi
    Posts
    2,538

    Default

    Quote Originally Posted by absolom7691 View Post
    I have MAP gas but I am not comfortable working with glass. I am curious how a polycarbonate or acrylic tube will work. I wonding how hard it will be to dimple without the plexi bubbling.
    Depends on the thickness of the wall of the plexi. DsliJon made some sweet dimple tubes from it. That said I prefer glass. Those with the skills make awesome stuff. I had some luck playing with glass actually real fun to play with, but not fun is the cost of gas and glass to practice and learn
    leading in trailing technology

  3. #13
    Join Date
    Apr 2010
    Location
    Grand Rapids, Mi
    Posts
    2,538

    Default

    Quote Originally Posted by Displaser View Post
    Just to clarify, the "linear lumia" is produced with a torture/dimple tube - just a borosilicate glass tube that has been deformed around the circumference. The lumia wheel creates a rotating effect.

    I loves the yellow...
    Thank you for the tubes you created for me.
    leading in trailing technology

  4. #14
    Join Date
    May 2007
    Location
    1 hr from everything in SoCal
    Posts
    2,833

    Default

    Quote Originally Posted by polishedball View Post
    Those with the skills make awesome stuff. I had some luck playing with glass actually real fun to play with, but not fun is the cost of gas and glass to practice and learn
    I have never worked with glass before which is why I am apprehensive to try. As far as the plexi tubes, I may give it a try. Paragon Plastics has a showroom about 20 minutes from where I live. Cut-off scraps are cheap enough to ruin a few while trying. Thanks for the input.
    If you're the smartest person in the room, then you're in the wrong room.

  5. #15
    Join Date
    Apr 2010
    Location
    Grand Rapids, Mi
    Posts
    2,538

    Default

    Watch out for the fumes.
    leading in trailing technology

  6. #16
    Bradfo69's Avatar
    Bradfo69 is offline Pending BST Forum Purchases: $47,127,283.53
    Join Date
    Jul 2010
    Location
    Wilmington, DE
    Posts
    6,207

    Default

    I think you'll find it starts to bubble at pretty low temperatures. Greg will likely attest to that. We made wheels with it at TEXLEM specifically FOR the bubbles. You'll still get interesting results even if it bubbles and iinteresting results are the name of the game. I don't think the gas or borosilicate was that prohibitively expensive. Gas kit at Home Depot is probably under $50 and I think I paid about $10 for 12 glass bottles on ebay. But, I realize expensive can be relative.

  7. #17
    Join Date
    May 2007
    Location
    1 hr from everything in SoCal
    Posts
    2,833

    Default

    The thought of hot glass shattering is what prohibits me from trying. I know next to nothing about glasswork other than temperature fluctuations need to be moderated, which is probably where the skill comes in.
    If you're the smartest person in the room, then you're in the wrong room.

  8. #18
    Join Date
    Apr 2010
    Location
    Grand Rapids, Mi
    Posts
    2,538

    Default

    Quote Originally Posted by Bradfo69 View Post
    I think you'll find it starts to bubble at pretty low temperatures. Greg will likely attest to that. We made wheels with it at TEXLEM specifically FOR the bubbles. You'll still get interesting results even if it bubbles and iinteresting results are the name of the game. I don't think the gas or borosilicate was that prohibitively expensive. Gas kit at Home Depot is probably under $50 and I think I paid about $10 for 12 glass bottles on ebay. But, I realize expensive can be relative.
    Did you ever put that torture tube that Jon built to use?

    Have you a date yet, or has it been scraped?
    leading in trailing technology

  9. #19
    Join Date
    Sep 2007
    Location
    Texas
    Posts
    807

    Default

    I actually prefer to work with glass over plastic, but both can produce some incredible effects. I wear didymium glasses when working with hot glass, and have only had glass crack when reheating a piece after it has cooled, or if you mix different glass due to their coefficient of expansion (COE). I have never had a bad experience other than cuts or burns on my fingers.

    MAPP gas works nicely, but is about $10 a cylinder. I use glass working tools and torch. I would empasize that holding the hot glass is the challange. I use a multi-prong tool that allows me to grasp the base of the borosilicate vials when heating them.
    "Information not shared, is information lost forever"

    Join ILDA
    Support Photonlexicon

  10. #20
    Join Date
    Sep 2013
    Posts
    93

    Default

    Someone help me out. I get the definition of "lumia," but how are these effects generated?

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •