Page 1 of 3 123 LastLast
Results 1 to 10 of 21

Thread: How to imitate the Argon laser colors?

  1. #1
    Join Date
    Feb 2008
    Location
    Hungary
    Posts
    420

    Laser Warning How to imitate the Argon laser colors?

    1:What is the experience. Which laser light visible similar?
    ( 500mw 532nm Green and 1W 445nm Blue? )


    2: How much power 532nm Green and 445nm Blue mixing, how I do that imitate a 2 to 5W argon laser?


    Thanks

  2. #2
    Join Date
    May 2007
    Location
    1 hr from everything in SoCal
    Posts
    2,833

    Default

    Major Argon lines are 488 and 514. Smaller lines include 457, 476, 496. There are some really minor lines in there and some UV lines, but the ones listed are what you want to shoot for. I would say to imitate argon would be to use 473 and 520 of equal power and probably 450 and 532 of equal power, but of less power than the 473 and 520. Imitating an argon with just a 445 and 532 is not going to happen. 445 is not a very good color IMO.
    If you're the smartest person in the room, then you're in the wrong room.

  3. #3
    swamidog's Avatar
    swamidog is offline Jr. Woodchuckington Janitor III, Esq.
    Join Date
    Nov 2006
    Location
    santa fe, nm
    Posts
    1,545,835

    Default

    we made a pretty decent argon-ish color with a 5:1 ratio of 445 to 532:

    10x445-532-01.jpg
    suppose you're thinkin' about a plate o' shrimp. Suddenly someone'll say, like, plate, or shrimp, or plate o' shrimp out of the blue, no explanation. No point in lookin' for one, either. It's all part of a cosmic unconciousness.

  4. #4
    Join Date
    Feb 2008
    Location
    Hungary
    Posts
    420

    Default

    That's true, the argon is have a lot of blue colors. I forgot this.
    I know, often had question, but I can see the similar laser projectors and the color balance not same.
    Why uses the lower light 520nm (50-200mw) the lot of new projectors? Okay, smal size, but earlier used 532nm (300-500mw). The 532nm brighter than 520nm, or not?

    I will build the Green/Blue (mix) projector.
    The green 500mw 532nm, but I don't know, how many mw blue need, how I get nice light blue.
    The 473nm is too expensive, therefore only 445nm.

    Hi Swamidog,
    The 5 : 1 ratio of 445 to 532? Then I need 2.5W 445Blue?

  5. #5
    swamidog's Avatar
    swamidog is offline Jr. Woodchuckington Janitor III, Esq.
    Join Date
    Nov 2006
    Location
    santa fe, nm
    Posts
    1,545,835

    Default

    that sounds about right. we had 2W of 532..

    Quote Originally Posted by whiteg View Post
    That's true, the argon is have a lot of blue colors. I forgot this.
    I know, often had question, but I can see the similar laser projectors and the color balance not same.
    Why uses the lower light 520nm (50-200mw) the lot of new projectors? Okay, smal size, but earlier used 532nm (300-500mw). The 532nm brighter than 520nm, or not?

    I will build the Green + Blue projector.
    The green 500mw 532nm, but I don't know, how many mw blue need, how I get nice light blue.
    The 473nm is too expensive, therefore only 445nm.

    Hi Swamidog,
    The 5 : 1 ratio of 445 to 532? Then I need 2.5W 445Blue?
    suppose you're thinkin' about a plate o' shrimp. Suddenly someone'll say, like, plate, or shrimp, or plate o' shrimp out of the blue, no explanation. No point in lookin' for one, either. It's all part of a cosmic unconciousness.

  6. #6
    Join Date
    Jun 2010
    Location
    Australia
    Posts
    3,733

    Default

    The eyes peak response is around 555nm, so watt for watt 532nm will appear brighter than 520nm.
    This space for rent.

  7. #7
    Join Date
    Jan 2006
    Location
    Charleston, SC
    Posts
    2,147,489,632

    Default

    I think the reason they suggested 520 nm is because it's closer to the 514 nm green from an Argon. True, not as bright as 532, but if you were looking for color accuracy, that would be closer.

    I interpreted his original question as 2 parts, one to get the color right regardless of power, and two to get the brightest beam. Maybe I misunderstood though.

    Adam

  8. #8
    Join Date
    Feb 2008
    Location
    Hungary
    Posts
    420

    Default

    Yes the 520 nm is closer to the Argon green, but I use the 532nm green and 445nm Blue.
    I was curious the mix rate. I think, I listen to the Swamidog tip.

  9. #9
    Join Date
    May 2007
    Location
    1 hr from everything in SoCal
    Posts
    2,833

    Default

    Quote Originally Posted by buffo View Post
    I think the reason they suggested 520 nm is because it's closer to the 514 nm green from an Argon....
    That was why I mentioned 520.

    473, I found to be a cheat. It seems to be a pretty accurate representation of 457 and 488 combined. When I mix 80mW of 520 and 100 mW of 473, I would swear I was looking at a multiline ALC60X.

    1W 520s are available, though expensive and .9W 473s are also slated.......
    If you're the smartest person in the room, then you're in the wrong room.

  10. #10
    Join Date
    Jan 2006
    Location
    Charleston, SC
    Posts
    2,147,489,632

    Smile

    Quote Originally Posted by absolom7691 View Post
    .9W 473s are also slated.......
    Really? 900 mw direct injection 473? That would be awesome! I've always preferred the 473 blue anyway. (An ideal projector for me would have a watt of 473 and a watt of 445, along with ~ 1.5 watts of green and 2 watts of red.)

    Any idea when these mythical 473's will be available? (And at what price?)

    Adam

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •