Nice one Andy! Watching with interest....
This space for rent.
The cooling is a fantastic approach. It might intimidate some, but because it substantially increases the EFFECIENCY of the diode by about 40% and that's huge, they are not over driven by much at all. Combining this with the color shift, the perceived brightness is significantly greater while the color shift is small enough that it is unnoticeable.
Something to keep in mind as well is that as the diode count increases the error sources do as well. So, what is often thought of as the "conservative" approach means there are more drivers to go kaput, more diode alignment mirrors, any single one of which will mess up the far field beam, more collimators that might drift slightly in focus and more diodes to replace when the next great diode becomes available. Having 30 diodes that are expected to last 100,000 hours (4 hours every night x 68 years) vs 4 diodes that last 2000 hours (4 hours every night for about one year) is a real consideration. With new diodes frequently being released, which is the better choice?
There are no magical optical solutions for combining the diodes. Given that the beams cannot overlap when stacking or knife edging then to place more than 4 multi-modes in a 5x5mm exit beam means each beam will have to be smaller and the divergence will have to be greater. The same holds for single modes as well. The numbers are different, but the principal is the same.
You are right. That is very true. So, get on it ASAPthe big space killer with multi diode builds like the arctos style one is leaving room behind each mirror mount to get an allen key inLet's see what you can do.
Jors,
There is one "magical" solution to combining diodes that has never been used in the entertainment projector industry, but is used all the time in telecommunications and by extremely high power industrial fiber laser manufacturers. I don't want to derail this thread any further and so if you are interested then PM me.
planter, start a new thread I wonder if this is the same thing ive looked into?
Eat Sleep Lase Repeat
I completely agree Eric. One point Andy and I disagree on is the overdriving of diodes, my perspective being that technology moves on quicker than diodes wear out, even when overdriven.
Also, a lot of diodes have different max current ratings for pulsed and CW operation. I'd love to see some proper data on where laser show use sits in the scheme of things, particularly when it may be modulated (pulsed) for short periods when displaying patterns, followed by comparatively long periods off.
I often hear about not supplying a client with an overdriven diode as it increases risk of failure, but I'd love to hear how many failures we really see with moderate overdriving above the pulsed rating.
For balance, iirc, my recent P73 diode builds were giving 850mW+ each when driven at the max pulsed current, which to me is completely safe in laser show use. It does suggest that being overly conservative and running at 500mW per diode is just wasting available power and increasing issues through extra complexity as Eric says.
Frikkin Lasers
http://www.frikkinlasers.co.uk
You are using Bonetti's defense against me, ah?
I thought it fitting, considering the rocky terrain.
I'll PM you and if you think well of it then I'll start the thread.
I don't disagree with what people are saying over over driving diodes, its just how I like to roll![]()
Eat Sleep Lase Repeat
OK, now that that's settled, lets see some of these mounts...hurry.