... look at the 4th image with the opened 25W@975nm-diode here: http://www.reprap.org/wiki/Laser_Cutter
They combined three single 9W-chips into a 105µm-fibre by shaping the beams to a flat horizontal bar and 'stacking' them to a square and focussing into the fiber.
The single-fiber-per-diode modules (the opened 5W and 9W diodes) are made by simply fixing the fiber with 5 to 10µ space direct to the emitter without any focussing ...
Viktor


Reply With Quote
If you're talking the '8-up', ya, dunno.. I'm sure 'DTR' can comment on that..
....and armed only with his trusty 21 Zorgawatt KTiOPO4...
