Results 1 to 7 of 7

Thread: How is the laser system from Lightspace?

  1. #1
    Join Date
    Oct 2015
    Posts
    1

    Default How is the laser system from Lightspace?

    Their laser seems good in selling.
    Any one offer some suggestion?

  2. #2
    Join Date
    Jun 2010
    Location
    Syracuse, NY
    Posts
    287

    Default

    I have the Unicorn 6W RGB from Lightspace and I am very pleased with it. It measures 5.7W at the aperture but if I remember correctly the spec sheet for this projector confirms that it should be a little under 6W, so it puts out what they claim it does. It is blue heavy but the beams are nicely matched and well aligned (at least in my limited experience). For the price I'd say they offer a great product. I know there are many others that would agree with me but then there are also others that would only recommend more expensive brands. Ultimately I suppose it depends on what you plan to do with it.
    Are your intentions professional or personal? Are you interested more in aerial beam effects or graphics? These projectors are great for beam effects and even graphics at short distances (less than 20 meters). The biggest venue I have had mine in was maybe 20 meters long and I noticed that the beams on the back wall were becoming less aligned (I shoudl point out that I was standing along the back wall when i noticed this. I didn't notice it from the front of the venue when looking back). Some of this could be corrected with some fine tuning of the alignment but I also noticed that differences in the beam characteristics were becoming more noticeable at that distance. I suppose that's just a characteristic of pure diode lasers at this point and there's not a whole lot that can be done about it until the technology improves. I'm not meaning to knock Lightspace about this at all I'm just pointing out that if you intend to project graphics across a large open area or onto a tall building you may start to see the effects in the display. For beam effects in a club or even a larger venue I still think you get the best bang for your buck with Lightspace and the limitations in their design doesn't become apparent in that aspect. Hope this helps.


    Happy Lasing!
    -Luke
    Last edited by ZeroPoint; 07-15-2016 at 00:47.

  3. #3
    Join Date
    Aug 2010
    Location
    London or Spain depending on the weather
    Posts
    1,390

    Default


    Pics urgently needed here .....especially with the top off!
    Remember this is a laserporn site ..................otherwise most people here will just ignore this thread as spam
    Cheers

  4. #4
    Bradfo69's Avatar
    Bradfo69 is offline Pending BST Forum Purchases: $47,127,283.53
    Join Date
    Jul 2010
    Location
    Wilmington, DE
    Posts
    6,207

    Default

    First post. Female name. 3am EST. My guess is it's fishing for compliments about Lightspace. However, to answer the persons original post. They are very good. I think I own around 14 of their projectors and have been very pleased.
    PM Sent...

  5. #5
    swamidog's Avatar
    swamidog is offline Jr. Woodchuckington Janitor III, Esq.
    Join Date
    Nov 2006
    Location
    santa fe, nm
    Posts
    1,545,835

    Default

    Quote Originally Posted by Bradfo69 View Post
    First post. Female name. 3am EST. My guess is it's fishing for compliments about Lightspace. However, to answer the persons original post. They are very good. I think I own around 14 of their projectors and have been very pleased.
    The marketing director for LightSpace is Emma Zeng..
    suppose you're thinkin' about a plate o' shrimp. Suddenly someone'll say, like, plate, or shrimp, or plate o' shrimp out of the blue, no explanation. No point in lookin' for one, either. It's all part of a cosmic unconciousness.

  6. #6
    Bradfo69's Avatar
    Bradfo69 is offline Pending BST Forum Purchases: $47,127,283.53
    Join Date
    Jul 2010
    Location
    Wilmington, DE
    Posts
    6,207

    Default

    And there you go....
    PM Sent...

  7. #7
    Join Date
    Apr 2016
    Posts
    162

    Default

    Don't be so quick with the conclusion. Join date: Oct 2015, only posting now? And if you're trying to hide your identity why would you use the same name you use on your companies' website? I see where you're coming from since this has been one before, but too early to judge.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •