Page 1 of 2 12 LastLast
Results 1 to 10 of 11

Thread: laser in a lighting scanner unit

  1. #1
    Join Date
    Dec 2007
    Location
    NorCal / Western Caribbean
    Posts
    710

    Default laser in a lighting scanner unit

    has anyone retro fitted a moving mirror light effect with a laser and a set of galvos rather than using a moving yoke type.

    I was thinking of making two but was thinking on how the image would be distorted by the main deflection mirror in different positions. Hope this makes sense. I'm guessing it will skew and stretch depending on the position.

    It e good to hear if anyone has tried this already.

    Cheers
    Rich

  2. #2
    Join Date
    Jul 2008
    Location
    Rotterdam, Netherlands
    Posts
    789

    Default

    Quote Originally Posted by padi.instructor View Post
    has anyone retro fitted a moving mirror light effect with a laser and a set of galvos rather than using a moving yoke type.

    I was thinking of making two but was thinking on how the image would be distorted by the main deflection mirror in different positions. Hope this makes sense. I'm guessing it will skew and stretch depending on the position.

    It e good to hear if anyone has tried this already.

    Cheers
    Rich
    Rob (stanwax) from laserwave UK has build just such a unit

  3. #3
    Join Date
    Dec 2007
    Location
    NorCal / Western Caribbean
    Posts
    710

    Default

    ah that rings a bell. I think I might have seen a picture on another forum but cannot for the life of me remember where.

    Any pics of the output would be great.

    Cheers
    Rich

  4. #4
    Join Date
    Jun 2008
    Posts
    55

    Default

    When a large brick of money hits me over the head I intend to build a Scanner contained inside a Clay Paky Golden Scan (1/2/3/HPE/4 etc) mostly because I think it would really fricking cool and becuase I think I would be able to get hold of one that has been stripped for parts already.

    http://www.lasershowproductions.com/...ldenscan_3.jpg

  5. #5
    Join Date
    Dec 2007
    Location
    NorCal / Western Caribbean
    Posts
    710

    Default

    yea they are great units. a bit bigger than i was going to build in though

  6. #6
    Join Date
    Jun 2008
    Posts
    55

  7. #7
    Join Date
    Dec 2007
    Location
    NorCal / Western Caribbean
    Posts
    710

    Default

    miniscan, good call. wicked little units. I had a miniscan HPE once and it randomly kept exploding lamps - most bizarre
    Cheers
    Rich.

  8. #8
    Join Date
    Jun 2008
    Posts
    55

    Default

    The lamps will do that if they run to hot or they get to old... They tend to take out the optics as well which can be quite frustrating especially if you thought a head to pack a spare bulb but not a new set of lens

  9. #9
    Join Date
    Dec 2007
    Location
    NorCal / Western Caribbean
    Posts
    710

    Default

    it was a right pain in the arse. they were new lamps too. I got rid of the them in the end. Wish I kept a couple now!!

  10. #10
    Join Date
    Jan 2007
    Location
    Sheepsville, Wales, UK
    Posts
    3,407

    Default

    Some images of it here in this thread http://www.photonlexicon.com/forums/...ead.php?t=2835
    one day I will get round to populating the gallery I have made for this item
    On paper it should pack about 500mW in reality its not that much but will be getting a few tweaks over the xmas break....its small compact and very reliable - gets a lot of use too.
    Rob
    If you need to ask the question 'whats so good about a laser' - you won't understand the answer.
    -----------------------------------------------------------------------------------------------
    Laserists do it by the nanometre.

    Stanwax Laser is a Corporate Member of Ilda

    Stanwax Laser main distributor of First Contact in UK - like us on Facebook http://www.facebook.com/FirstContactPolymerCleaner
    www.photoniccleaning.co.uk

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •