Page 9 of 11 FirstFirst ... 567891011 LastLast
Results 81 to 90 of 108

Thread: Lumia Extravaganza

  1. #81
    Join Date
    Nov 2008
    Location
    San Marcos, Texas, USA
    Posts
    144

    Default Aiming Lumia

    Quote Originally Posted by Stuka View Post
    Projector layout question -

    If incorporating several lumia effects requiring beam rerouting with actuators, what do you normally use as an aimpoint for the different effects? Do you try to angle your actuator / lumia mounting so all beam effects terminate at the same relative scrim location, or just let everything shoot perpendicular from the projector?
    I've tried to get by with a standard aiming point (perpendicular to the projector), but I always get bothered by the results and have to re-aim everything at the center point of the screen/projection area. Sometimes you need every item in the optical path to be adjustable to get the best results.

  2. #82
    Join Date
    Oct 2006
    Location
    Central Florida
    Posts
    7,067

    Lightbulb

    Quote Originally Posted by allthatwhichis View Post
    Lumina OLLEM...



    Damn; this shit looks awesome and none of y'all MFers are watchin...
    Last edited by allthatwhichis; 01-25-2009 at 12:29.

  3. #83
    Join Date
    Sep 2007
    Location
    Omaha, NE
    Posts
    769

    Default Bang Thunk Crack

    I have some Ledex rotary solenoids that I was going to use for redirecting the beam to different effects, but damn those things are loud. I could try to insulate them somewhat, but I don't want a big clunk sound every time I want to change effects. It is not that bad but would definitely be noticeable in the intimate environments where I plan to use it most.
    Any suggestions?
    -Mike


  4. #84
    Join Date
    Sep 2007
    Location
    Omaha, NE
    Posts
    769

    Default Shhhhhhh...

    I busted out the hardware tonight and ended up making some of my own actuators. The rotary solenoids were just too damn loud, plus they required at least 12vdc at like 100ma a piece. I have a whole box of these 7vdc plunger solenoids, do I decided to make something with those. I should really call this whole projector project "Plan B" because I seem to be redoing everything twice!

    Redo #1 involved using a small chain & bushings to drive the wheels vs O-rings and tiny bearings. I used some quick disconnect drill bit things from Harbor Freight for $1.99 a piece. I used .25 cent phillips tips JB welded to the glass wheels, so that way I can have quick disconnect wheels in case I come upon some new interesting glass I want to try. The new chain and sprocket setup is smooth like buttah so it was definitely worth the hassle of redoing it that way.

    Redo #2 involved the beam actuators. Actually, the end design may have been #3 or so, but you know what that's like... I used some aluminum pieces and the 7vdc solenoids to come up with what is in the photos. The end result is much quieter than the rotary, does what I want, and hogs a lot less juice while doing so (can be run from a 9 volt battery no problem). If anyone wants a couple of these solenoids, let me know. I have at least 30 of them- I got 'em for like 25 cents a piece so I couldn't pass it up.

    My "mystery box" which contains the last 45 degree mirror bears a strange resemblance to an old aquarium pump- I'll wait to see how that pans out before I embarrass myself in public with photographic evidence of that one!

    Later, Mike
    Attached Images Attached Images


  5. #85
    Join Date
    Nov 2008
    Location
    San Marcos, Texas, USA
    Posts
    144

    Default My new lumia projector...

    OK, ya'll lumia fans, here are the aforementioned pics of my new lumia projector. I'm calling it the Laser Galaxy. It is built as a module so that one can change out the laser module for a brighter one, or mount the lumia module next to a 168 or whatever you want to feed into the little guy. On this one I've got the beams stacked and parallel so that each color does something slightly different through the optics, and you can pick off the colors.

    The video I just posted: http://uk.youtube.com/watch?v=kis-Q_6YH1o

    Details: CNI lasers,

    671 - 150 mW
    532 - 20 mW
    473 - 50 mW

    4 DMX controlled actuators GM20, and 4 DMX speed controls (2 motors are tied together) I used motors from Creative Laser Production, and Hankscraft. I tried the Poly 20 for one of the grating wheels, but I prefer the Poly 4 slowly turning, I can get two motor speeds going on the gratings and it is cooler.

    It's been years in the making! Know any planetariums that need this?

    - Tim
    Attached Images Attached Images

  6. #86
    Join Date
    Oct 2006
    Location
    Central Florida
    Posts
    7,067

    Thumbs up

    WOW Tim, that is a work of art! I can call my room a planetarium; I'd love to have something like that. Do you have any video of the box in action?

  7. #87
    Join Date
    Sep 2007
    Location
    Omaha, NE
    Posts
    769

    Thumbs up


    Wow Tim! Incredible!
    Thanks for posting my new favorite video!
    You weren't sh!++n about that diamond! (shine on you crazy?)
    TRIPPY~~~~
    I love all of them going at the same time- what a buffet.
    Do you know off hand which glass was making the really light whispy shapes?
    (I know- that narrows it down) ha! but do ya know the one I mean?
    That REALLY is inspiring+++
    Thanks Again, I thought this thread was starting to fizzle but you just lit it up bigtime!
    -Mike


  8. #88
    Join Date
    Sep 2007
    Location
    Omaha, NE
    Posts
    769

    Default

    Hey I almost forgot- hopefully I will be doing some more tinkering this weekend- here are the parts I have ordered (have most so far)

    1) 100mw 532 (had already)
    2) 100mw 650
    1) ?mw 405 diode
    2) drlava drivers
    1) 532/650 dichro
    1) dichro mount
    2) mixedgas torture tubes

    Should be fun!

    -Mike


  9. #89
    Join Date
    Sep 2007
    Location
    Texas
    Posts
    807

    Default

    Tim,

    Beautiful work - well done...

    Thanks for sharing this and the video with us.

    Greg

  10. #90
    Join Date
    Nov 2008
    Location
    San Marcos, Texas, USA
    Posts
    144

    Default It's a salt shaker!

    Quote Originally Posted by mikkojay View Post


    Do you know off hand which glass was making the really light whispy shapes?
    (I know- that narrows it down) ha! but do ya know the one I mean?

    -Mike
    Oh Yeah!!! I know the one you mean. That would be the "salt shaker" - from WalMart, circa a few years ago.... I wish I'd bought 10 of those suckers when they were around. - Tim

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •