Amazing Huebon !!
Amazing Huebon !!
Nope, try again.
I must add some notes to help:
Do you see any beams?
Do you see any un-even lines?
The laser is a 1w rgb
The location was a small theata kind of setup with a stage, curtains at the rear and some lighting. If you visit our youtube pages you will see more examples.
The method is very new and we are not sure if it was used yet. I want to see if anyone can figure it out before we go pubic with all the details.
I know it's unrelated, but...
What software was used to create the animation?
Tim
Hi Tim,
The question is a little difficult to answer because 5 applications were used to create the effects.
Two 3d applications
Two different laser show applications
One Dmx controller application
How do the effects look, ok?
Anyone look at the others we did?
I had quite a lot of direct emails about this so I suspect soon I will have to tell you how its done.
Andy,
I would have thought Pepper's Ghost as well....
It looks nice - I hope that this is viable in a normal location to conduct a laser show. Don't keep us in wondering too much longer!
Greg
where is it at???
-Josh
In animation #1: http://www.youtube.com/watch?v=YPsRm...eature=related
It looks like the beam is coming from the floor (the sparkles).
#11 http://www.youtube.com/watch?v=QRq-7...eature=related is just a cool animation.
The majority of the later animations are the same animation files that are on the Utopia software web site: http://www.hb-laser.com/hb-en-downloadbereich.html?f=38
The fact that you can't see the beams and the fact that the way the image scans outwards is rather slow at the extremes and with a visible vertical cut off thats sharp with no light spill is not typical of light in air and makes me think there's a liquid involved here. I'm wondering if the curtains or part of the curtains are actually a 3d film on the rear of a thin glass tank that contains a phosphorescent liquid and the laser is rear scanned into the liquid much like a tv is rear scanned from the tube the curtain film being used to provide both a background and an attentuation medium to so as to prevent any non direct beams ie light from the beams rather than point being visible thereby cleaning up the image.
Andy, you don't work for Ministry.SK do you? This is very typical of their types of displays / innovations.