Page 3 of 5 FirstFirst 12345 LastLast
Results 21 to 30 of 50

Thread: where is the projector

  1. #21
    Join Date
    Jul 2005
    Location
    Lancashire UK
    Posts
    1,379

    Default

    ANDY ...I have checked all the videos .... and as much as i like to think that "i know how everything is done" you have stumped me here .....

    i have not got a clue,

    no mist... no water vapour... no reflections .... no beams

    and virtual reality 3D ....

    as much as i want to know how you do it ... im also inclined to say that a Master magian never reveals how their illusions are done

    i think that this is so special that you should keep it to yourself

    Do you think that it is something that you could patent and licence for use by others ?

    all the best ... Karl


    EDIT: ..... Andy you are spoiling my weekend ..... all im doing now is thinking about how this is done

    the only thing that does not look right in the videos to me is the Lighting
    You have 2 Par Cans on the stage but these dont seem to tie up with the lighting on the stage

    Are the Drapes back lit and is the colour segregation ( blue / white and Red / White ) important to the effect ?

    please put me out of my misery .... im not going to sleep tonight

    all the best ... Karl
    Last edited by Banthai; 02-15-2009 at 10:18.

  2. #22
    Join Date
    Jul 2008
    Location
    Miami
    Posts
    506

    Default LCD

    My guess is, theres no laser projector. It is pre-recorded vid that is being played back on a lcd screen. The lighting on the stage acts like a back light for the lcd screen. The screen is hung from up above .
    Last edited by Laser Zone; 02-15-2009 at 06:44.

  3. #23
    Join Date
    Jul 2008
    Location
    Miami
    Posts
    506

    Default ????

    Actually I dont F@#$%^g know !?! Its done really good though . Maybe mirrors or something.

  4. #24
    Join Date
    Jul 2006
    Location
    Connecticut, USA
    Posts
    2,478

    Default

    andy-

    EXCELLENT effect. i sincerely hope for your sake that this is something you have discovered. cuz i think you may have a gold mine! really really professional and damn near perfect laser scans! i dont even see any flickering typical of scanned laser beams.

    which leads me to believe this may *not* be lasers? or perhaps...pre-recorded (like someone else said above)

    DAAMN IT!!!! youre KILLIN me!!!!!

    howd ya do it? tell me...tell me!!!
    http://www.laserist.org/images/ildalogos/ILDA-logo_colored-beams_Corporate_150w.jpg

    ILDA- U.S. Laser Regulatory Committee

    Authorized Dealer for:

    • Pangolin Laser Software and Hardware
    • KVANT Laser Modules & Laser Systems
    • X-Laser USA
    • CNI Lasers
    • Cambridge Technology & Eye Magic Professional Scanning Systems

    FDA/CDRH Certified Professional LuminanceRGB Laser Light Show Systems


  5. #25
    Join Date
    Feb 2005
    Posts
    1,131

    Default

    OK,
    this is so frigg'n cool!
    http://www.youtube.com/watch?v=-UVjQ...eature=related

    come on tell us or just PM me I will keep it on the DL

  6. #26
    Join Date
    Nov 2007
    Location
    Bend Oregon USA
    Posts
    3,350

    Default Alright andy...now you are just pissing me off!

    Ok here is my best guess. You are using some kind of stereo camera. projection is on a scrim. It appears to be 2d until you put on 3d glasses. so basically you put 3d glasses on your camera
    Pat B

    laserman532 on ebay

    Been there, done that, got the t-shirt & selling it in a garage sale.

  7. #27
    Join Date
    Nov 2007
    Location
    Bend Oregon USA
    Posts
    3,350

    Default One More Final Guess

    Ok here it is, your laser beam is very expanded (low power per unit area) until it reaches the center of the field where the beam goes into sharp point (high power per unit area) then from that point it rapidly expands (low power per unit area) I guess image is projected from (under) floor through ceiling. You also have some very fast high volume blowing fans that move some kind of particulate (may be fog) from top to bottom or bottom to top. Particulates reflect the light when they come into focus plane

    hell I dont know...i am going to go back to blowing up 405 lasers
    Pat B

    laserman532 on ebay

    Been there, done that, got the t-shirt & selling it in a garage sale.

  8. #28
    Join Date
    May 2007
    Location
    Romania
    Posts
    1,041

    Default

    Hi Evryone, so many responces and guesses, what a quiz this is turning out to be.

    With so many variations of emails I have to read all then answer in one email on monday.

    In brief to anser some:

    Its not fake
    it is done by laser, I said that very early in messages.
    For this, our company is not connected to any other company such one ending in .sk
    It does not use water.
    It uses only one laser.
    The scanners are exreamly fast
    The sollution is possible for most people depending on hardware/software.

    I expect we will have some new videos of this outdoors in a few days if the tests work out.

    Tomorrow I will read all responces and try to help a bit.

    With so much interest and PMs I dont think it wil lbe long before a solution is known even if its not the right one. The right one s known by just a few in our office.



    Best Regards

    Andy

  9. #29
    Join Date
    May 2007
    Location
    Romania
    Posts
    1,041

    Default

    Sorry for spoiling your weekend, its just a quiz and to be frank I am also a person that can eventually work things out. "no mist... no water vapour... no reflections .... no beams" well of course is beams, you just cannot see them.



    Quote Originally Posted by Banthai View Post
    ANDY ...I have checked all the videos .... and as much as i like to think that "i know how everything is done" you have stumped me here .....

    i have not got a clue,

    no mist... no water vapour... no reflections .... no beams

    and virtual reality 3D ....

    as much as i want to know how you do it ... im also inclined to say that a Master magian never reveals how their illusions are done

    i think that this is so special that you should keep it to yourself

    Do you think that it is something that you could patent and licence for use by others ?

    all the best ... Karl


    EDIT: ..... Andy you are spoiling my weekend ..... all im doing now is thinking about how this is done

    the only thing that does not look right in the videos to me is the Lighting
    You have 2 Par Cans on the stage but these dont seem to tie up with the lighting on the stage

    Are the Drapes back lit and is the colour segregation ( blue / white and Red / White ) important to the effect ?

    please put me out of my misery .... im not going to sleep tonight

    all the best ... Karl

  10. #30
    Join Date
    May 2007
    Location
    Romania
    Posts
    1,041

    Default

    Good guess but 1000% incorrect, it is a laser projection.

    Quote Originally Posted by Laser Zone View Post
    My guess is, theres no laser projector. It is pre-recorded vid that is being played back on a lcd screen. The lighting on the stage acts like a back light for the lcd screen. The screen is hung from up above .

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •