Page 2 of 3 FirstFirst 123 LastLast
Results 11 to 20 of 23

Thread: Best laser editing and operating Software

  1. #11
    Join Date
    Feb 2008
    Location
    Berlin, Germany
    Posts
    10

    Default

    Quote Originally Posted by buffo View Post
    I have a real problem with your example, because I believe it identifies a problem with the show operator, not the hardware.

    If you slave the QM-2000 to an external source of time code and the source of the time code stops, what do you think the QM-2000 is supposed to do? Of course it will stop! That's how time code works! A LaserGraph DSP would also stop if you had it slaved to an external time code source.

    The problem in your example is not the QM-2000 or windows XP, but the fact that the PC that crashed was also the source of the time code.
    Adam
    The PC was not the source of timecode but part of the timcode chain. Hey, and this is the NORMAL way you have it. Timecode generated by external source, decoded by TC2000 or similar, delivered to the PC via RS232, feed into the QM2000 over Windows/OS COM Port driver. If the OS crashes, COM port data are no langer transmitted to the QM2000 and that is why it stops. If you call this way inside the PC not part of the QM2000, it is a cheesy assumption as I cannot feed timecode a different way except transformin the QM2000 into a CD2000. And that would be excactly in the way of my argument. Dedicated hardware and operation system for maximum reliablility. And the old myth of a crashing PC would not stop a show...it is a myth. A lot of crashes lead to a reboot incl. PCI device reset. Once this happens, the QM2000 will stop. Even a lame network connection can cause problems to the QM2000 show stability causing dropouts, jumps and jitters if you have the preview window open. From my point of view, the system can only by as stable as the basis. And Windows or better general purpose Operation Systems are not the best ground to build it on...and we are talking about the best in here, arent we? So the really best system for show playback would be something simple and reliable...like ADAT.

  2. #12
    Join Date
    May 2006
    Location
    Native Floridian
    Posts
    3,145

    Default

    Hmmm... He asks which laser controller/software is the best, we tell him, yet it seems he already has an opinion. My question is, why did he ask to begin with, and is he affiliated with the company that makes Lasergraph DSP?

    So the really best system for show playback would be something simple and reliable...like ADAT.
    I think this use to be true several years ago, however, in my opinion, the ADAT's time has come and gone. An ADAT is indeed reliable, however I've been in the middle of a couple shows before when one would flake out and have problems. I think the best platform for show playback is the QM2K. Very reliable and it's nice to have the ability to make some adjustments on the fly. I can't comment on the Lasergraph DSP, I've never used it though I hear it's a very nice product.

  3. #13
    Join Date
    Feb 2008
    Location
    Berlin, Germany
    Posts
    10

    Default

    Quote Originally Posted by DZ View Post
    Hmmm... He asks which laser controller/software is the best, we tell him, yet it seems he already has an opinion. My question is, why did he ask to begin with, and is he affiliated with the company that makes Lasergraph DSP?
    Sorry, but this is bullshit of he day.
    The user starting this thread is not the same as me althought we both have similar names in here. And I am more with Pangolin than with Sollinger although Sollinger is living in the same town - Berlin.
    I own a QM2000 and I like it. But regarding quality of the overall package, I know the Windows and I do not trust it in a way as I trust a dedicated system.
    This Windows stuff is nice and it has a pretty good value and it works in 99% of all cases. But regarding the real critical jobs I would myself take a DSP.

  4. #14
    Join Date
    Jan 2006
    Location
    Charleston, SC
    Posts
    2,147,489,632

    Cool

    Quote Originally Posted by DZ View Post
    Hmmm... He asks which laser controller/software is the best, we tell him, yet it seems he already has an opinion.
    No, it's a different guy. John3626 is the one who started the thread and asked the question, while JohnS is the one who advocated the LaserGraph DSP.
    Quote Originally Posted by JohnS View Post
    The PC was not the source of timecode but part of the timcode chain.
    Then by your admission, anything that interrupted the time code would have stopped the show. How is this the QM-2000's fault?

    What would happen if you interrupted the time code to a Lasergraph DSP that was slaved to external time code? Yeah, that's right... THE SAME THING.
    I cannot feed timecode a different way except transformin the QM2000 into a CD2000.
    That's actually the way a lot of people do it. The CD2000 is the most reliable way to run. The Pink Floyd Laser Extravaganza runs on CD-2000's...
    And the old myth of a crashing PC would not stop a show...it is a myth. A lot of crashes lead to a reboot incl. PCI device reset.
    Care to back that up with a real-world example? Because in the 2 years I've owned my QM-2000 I have *NEVER* had the PC reset while a show is running. EVER. I have locked the machine up a few times, but it didn't reset. Once I even managed to lock it up while a show was running. But it still didn't reset. The show continued to play, and when the show ended the projector stopped and the OS hung.
    So the really best system for show playback would be something simple and reliable...like ADAT.
    Except that you can't change anything on the fly. Also, tape is fragile. Sure, if it never leaves the machine it's probably OK, but it's also *ancient* technology. If you really just want to run pre-made content, then I'd burn the show onto a CD and use a CD-2000 to run everything.
    Quote Originally Posted by DZ View Post
    in my opinion, the ADAT's time has come and gone. An ADAT is indeed reliable, however I've been in the middle of a couple shows before when one would flake out and have problems.
    Yep - I agree. Tape is not fool-proof; they do wear out. That's why I think the CD-2000 is the ultimate solution.

    But heck, even a CD can get a scratch on it. Still, we're talking about very, *very* uncommon failures here. You may as well worry about a power supply failing, or a laser dying...

    Bottom line, the QM-2000 is an extremely reliable system. And if you are that concerned about the PC, then run the show off a CD-2000 and be done with it.

    Adam

  5. #15
    mixedgas's Avatar
    mixedgas is offline Creaky Old Award Winning Bastard Technologist
    Infinitus Excellentia Ion Laser Dominatus
    Join Date
    May 2007
    Location
    A lab with some dripping water on the floor.
    Posts
    10,118

    Default

    Looks like we have a test to run at SELEM. The crash the QM trial by fire.


    Or do we put the QM on a pole and submerge it in the lake, and if it floats, its a witch or a duck? If it sinks, too bad? Sorry, just watched a clip of Monty Python.....

    I can say this, I have a had a QM32 show continue to run on a crashed PC, as in locked up win98. Is Pangolin still claiming that for the QM2000 or is it the old QM32 marketing hanging around in cyberspace?

    And Berlin is a big town.

    Steve

  6. #16
    Join Date
    Feb 2008
    Location
    Berlin, Germany
    Posts
    10

    Default

    Quote Originally Posted by buffo View Post
    I have locked the machine up a few times, but it didn't reset. Once I even managed to lock it up while a show was running. But it still didn't reset. The show continued to play, and when the show ended the projector stopped and the OS hung.
    Same condition with Timecode coming over RS232 and your show would have stoped. It is simply not fair, to exclude the Windows out of the system when talking about the system. It is like talking over a massive bunker made of concrete standing on wooden pillars right in the middle of a lake. Is this bunker still safe? Same with Windows and any Lasersoftware running on Windows. No just Pangolin. Pangolin may be the most reliable software on Windows...but it is still Windows.

  7. #17
    Join Date
    Aug 2008
    Location
    UK
    Posts
    5,704

    Default

    Whereas I know nothing of the systems you're talking about I will ask one thing, how many here have had tape chew in a tape recorder?

    It does happen and no doubt that stops a show on an ADAT and it destroys the original and it stops a fast resume if something does happen as you have to untangle the tape. That's the downfall of any tape system. Plus we haven't even got onto talking about drop outs caused by defects or wear on the magnetic coating.

    That's where solid state really comes into its own.

    I have no doubt both systems have their pros and cons, but the fact remains, Pangolin's QM remains one of the most reliable systems on the market which is why most of the world's Premier Laser Display Companies use it and why many are using it to control huge numbers of lasers - Awakenings and Trance Energy being just two examples where its being used to control over 20 lasers simoultaneously.

  8. #18
    Join Date
    Jul 2008
    Location
    Maryland
    Posts
    1,691

    Default

    what about a friken flash media card

    no windows, no time code, you could possibly even run a system that used flash media in a controller, in the projector, and have a nice BIG RED BUTTON, in case of a problem.

    The RIYA MultiBus takes 2 gig flash media (thats over 3 hours of show) and can be controlled over Ethernet. so just stick in a card and control what frames are playing over ethernet.

    i think that pango can do this as well but i dont know much about pango
    Quis custodiet ipsos custodies?
    Solid State Builders Group

  9. #19
    mixedgas's Avatar
    mixedgas is offline Creaky Old Award Winning Bastard Technologist
    Infinitus Excellentia Ion Laser Dominatus
    Join Date
    May 2007
    Location
    A lab with some dripping water on the floor.
    Posts
    10,118

    Default

    There is a reason why I own TWO adats. They do munch tapes, especially if you used SVHS instead of a proper adat tape. You also need to carefuuly set up the tape tension, perhaps with a external winder.

    Steve

  10. #20
    mixedgas's Avatar
    mixedgas is offline Creaky Old Award Winning Bastard Technologist
    Infinitus Excellentia Ion Laser Dominatus
    Join Date
    May 2007
    Location
    A lab with some dripping water on the floor.
    Posts
    10,118

    Default

    Isnt the interface still a PC on the flash cards? Or will they take midi or DMX? Although I have suffered stress and lost brain cells to a badly designed, rather forgetful, console on my ex partner's system.

    Steve

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •