Page 1 of 2 12 LastLast
Results 1 to 10 of 19

Thread: Diverting a beam

  1. #1
    Join Date
    Jul 2009
    Location
    Essex, UK
    Posts
    53

    Default Diverting a beam

    Is there such as thing that can divert a beam on command. For example the beam can be directed into a scanner as normal but when required it can be directed elsewhere, out of another aparture? If so, what's it called, where can I get it and how do I control it within a projector, can it be connected up and controlled with the projector controller?

    Hope you get what I mean from that poor description!
    Cheers

  2. #2
    Join Date
    May 2007
    Location
    Orlando, FL
    Posts
    1,090

    Default

    Cetainly... you can use GM20's to do that...

    It's a scanner head that is flat until needed... when engaged, it turns the beam in a specific direction.

    A few members here have that

    --DDL
    I suffer from the Dunning–Kruger effect... daily.

  3. #3
    Join Date
    Jul 2008
    Location
    My momentum is too precisely determined :S
    Posts
    1,777

    Default

    Yes you can, they are basically shutters with a mirror attached. There are also some types of shutters that use some kind of pbs that splits the beam so you can have your beam exited at two apertures.

    I once saw a guy with a nice argon and a huge beamtable with this principle. I couldn't look into his projector but I could hear the clicks of the relais. It was amazing: while a pair of scanners was giving some nice graphics, he could point static beams to bounce mirrors and diffraction gratings around the room. It was all controlled with MIDI, but I'm afraid I don't have more details about how exactly he did it. Nice show, he could make chases.
    It was a 7W Argon for a 500 crowd party OVERKILL

  4. #4
    Join Date
    Jul 2009
    Location
    Essex, UK
    Posts
    53

    Default

    Cheers DDL, exactly what I'm thinking about - yours is a much better discription lol!

  5. #5
    Join Date
    Jul 2009
    Location
    Essex, UK
    Posts
    53

    Default

    Quote Originally Posted by colouredmirrorball View Post
    Yes you can, they are basically shutters with a mirror attached. There are also some types of shutters that use some kind of pbs that splits the beam so you can have your beam exited at two apertures.

    I once saw a guy with a nice argon and a huge beamtable with this principle. I couldn't look into his projector but I could hear the clicks of the relais. It was amazing: while a pair of scanners was giving some nice graphics, he could point static beams to bounce mirrors and diffraction gratings around the room. It was all controlled with MIDI, but I'm afraid I don't have more details about how exactly he did it. Nice show, he could make chases.
    It was a 7W Argon for a 500 crowd party OVERKILL
    Yup, I'd like to have the scanner going and also bounce some beams around the room, diffraction gratings and all!

  6. #6
    Join Date
    May 2007
    Location
    Orlando, FL
    Posts
    1,090

    Default

    Quote Originally Posted by anderino View Post
    Cheers DDL, exactly what I'm thinking about - yours is a much better discription lol!
    Not a problem

    Quote Originally Posted by anderino View Post
    Yup, I'd like to have the scanner going and also bounce some beams around the room, diffraction gratings and all!
    Hey make sure you share some pictures

    --DDL
    I suffer from the Dunning–Kruger effect... daily.

  7. #7
    Join Date
    Jul 2008
    Location
    My momentum is too precisely determined :S
    Posts
    1,777

    Default

    I'd like to share some more details about optics/control but the only thing I can give you are some pics. Not the best quality, taken in daylight with a mobile phone and with a bit of fog. Look at the ground in the second pic, it might give you an idea about the number of beams .
    Attached Images Attached Images

  8. #8
    Join Date
    Oct 2008
    Location
    Portland
    Posts
    1,566

    Default

    Quote Originally Posted by daedal View Post
    Cetainly... you can use GM20's to do that...

    It's a scanner head that is flat until needed... when engaged, it turns the beam in a specific direction.

    A few members here have that

    --DDL
    You can find them here: http://www.microlaserlabs.com/index....fbch5apsu4qp83
    Mixedgas also has a few I believe, and check ebay too..

    -Adam
    Support your local Janitor- not solicited .

    Laser (the acronym derived from Light Amplification by Stimulated Emissions of Radiation) is a spectacular manifestation of this process. It is a source which emits a kind of light of unrivaled purity and intensity not found in any of the previously known sources of radiation. - Lasers & Non-Linear Optics, B.B. Laud.

  9. #9
    Join Date
    Aug 2007
    Location
    Under a rock in Cambridge UK
    Posts
    1,353

    Default Beam Steering

    The device you need is called an 'Actuator', you can use GM20's as Daedal says, or a cheaper alternative is an STP8, which you can get from places like Medialas. Although they are often used as shutters, a true safe shutter should be spring loaded, so that if it looses power, it blocks the beam naturally.

    You can control the actuators via DMX using something like the Milford Instruments DMX - Voltage converter, here http://www.milinst.com/DMX/dmxtext.htm#dmx at the bottom of the page... 5v activates and 0v deactivates. Although this puts out 10v, a simple voltage regulator will sort it... You then use either a DMX console, or software that outputs DMX such as Pangolin Showtime Live...

    Cheers
    Mark

  10. #10
    Join Date
    May 2007
    Location
    Orlando, FL
    Posts
    1,090

    Default

    If you've got the $$$, you can look at something ready made...

    http://www.lumalaser.com/products.html

    --DDL
    I suffer from the Dunning–Kruger effect... daily.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •