Page 2 of 3 FirstFirst 123 LastLast
Results 11 to 20 of 21

Thread: Lexel 95 and PS

  1. #11
    Join Date
    Oct 2008
    Location
    Portland
    Posts
    1,566

    Thumbs up

    caNothing much to say here but I wish I had some three phase and an ion laser DPSS ain't nothing compared to an argon, krypton or mixed gas lasers. There is a reason they take so much power, you get out what you put in... Damn I miss 488nm hell with 473 and the rest of the bunch!

    -Adam
    Last edited by sugeek; 08-09-2009 at 20:26. Reason: damn, too little sleep forgive me
    Support your local Janitor- not solicited .

    Laser (the acronym derived from Light Amplification by Stimulated Emissions of Radiation) is a spectacular manifestation of this process. It is a source which emits a kind of light of unrivaled purity and intensity not found in any of the previously known sources of radiation. - Lasers & Non-Linear Optics, B.B. Laud.

  2. #12
    Join Date
    Jun 2006
    Location
    Charlotte, NC
    Posts
    1,127

    Default

    Quote Originally Posted by mixedgas View Post
    Thats at least two , maybe 3 95s at SELEM.
    Has anyone ordered these parts. I am having trouble finding some of them are or what they are for sure. I have two lexel 88's I plan on bringing that have been having issues.

    88CSCH.PD
    www.k3pgp.org/Notebook/Lasersam/88csch.pdf

    001-88PSCH.PDF
    cannot find

    LM301A In round metal can (741A works in a pinch)
    http://search.digikey.com/scripts/Dk...ame=LM301AH-ND

    1N823 (1) (6.2V ZENER)
    Cannot find

    MPS6531 (4) (NPN TRANSISTOR)
    non-stock
    http://search.digikey.com/scripts/Dk...ame=MPS6531-ND

    MPS6534 (4) (PNP TRANSISTOR)
    non-stock
    http://search.digikey.com/scripts/Dk...ame=MPS6534-ND

    1n4744 (2) (15V ZENER)
    http://search.digikey.com/scripts/Dk...1N4744ADICT-ND

    1n5363B (2) (30V ZENER, 5 watt)
    http://search.digikey.com/scripts/Dk...=1N5363BGOS-ND

    1N4747A (3) (20V ZENER)
    http://search.digikey.com/scripts/Dk...1N4747ADICT-ND

    2N3773 passbank driver NPN
    http://search.digikey.com/scripts/Dk...me=497-6204-ND

    2N3738 Passbank Driver NPN
    cannot find

    Some methanol to clean your optics.

    Tiffin (took over Kodak) Lens Tissue
    http://www.canogacamera.com/detail.aspx?ID=9723

  3. #13
    Join Date
    Aug 2008
    Location
    the hills
    Posts
    983

    Default

    I found everything at Mouser except for the metal can 301 which digikey has.

  4. #14
    mixedgas's Avatar
    mixedgas is offline Creaky Old Award Winning Bastard Technologist
    Infinitus Excellentia Ion Laser Dominatus
    Join Date
    May 2007
    Location
    A lab with some dripping water on the floor.
    Posts
    10,113

    Default

    [QUOTE=dream beamz;110282]Has anyone ordered these parts. I am having trouble finding some of them are or what they are for sure. I have two lexel 88's I plan on bringing that have been having issues.

    88CSCH.PD
    www.k3pgp.org/Notebook/Lasersam/88csch.pdf

    001-88PSCH.PDF
    cannot find

    http://www.kellerstudio.de/repairfaq/sam/laserasc.htm

    just google lexel 88 sams faq and you usually have no problems getting it, PGP doesnt update his mirror.

    Steve
    Qui habet Christos, habet Vitam!
    I should have rented the space under my name for advertising.
    When I still could have...

  5. #15
    Join Date
    Jun 2006
    Location
    Charlotte, NC
    Posts
    1,127

    Default

    [QUOTE=mixedgas;110442]
    Quote Originally Posted by dream beamz View Post
    Has anyone ordered these parts. I am having trouble finding some of them are or what they are for sure. I have two lexel 88's I plan on bringing that have been having issues.

    88CSCH.PD
    www.k3pgp.org/Notebook/Lasersam/88csch.pdf

    001-88PSCH.PDF
    cannot find

    http://www.kellerstudio.de/repairfaq/sam/laserasc.htm

    just google lexel 88 sams faq and you usually have no problems getting it, PGP doesnt update his mirror.

    Steve
    Thanks steve, I have everything I need on order except the methanol, is anyone going to have any extra as I do not think I will have time to pick up any between now and then.

    Also around what time roughly do you plan on starting the how-to. I am having surgery Thursday and would like a little more sleep on Saturday. I would prefer to wake up at 9 and be there around 11am but its all up to everyone else

  6. #16
    mixedgas's Avatar
    mixedgas is offline Creaky Old Award Winning Bastard Technologist
    Infinitus Excellentia Ion Laser Dominatus
    Join Date
    May 2007
    Location
    A lab with some dripping water on the floor.
    Posts
    10,113

    Default

    [QUOTE=dream beamz;110453]
    Quote Originally Posted by mixedgas View Post

    Thanks steve, I have everything I need on order except the methanol, is anyone going to have any extra as I do not think I will have time to pick up any between now and then.

    Also around what time roughly do you plan on starting the how-to. I am having surgery Thursday and would like a little more sleep on Saturday. I would prefer to wake up at 9 and be there around 11am but its all up to everyone else

    Hum whenever. I have the methanol.

    Steve
    Qui habet Christos, habet Vitam!
    I should have rented the space under my name for advertising.
    When I still could have...

  7. #17
    Join Date
    Aug 2008
    Location
    the hills
    Posts
    983

    Thumbs up KICKASS!!!!

    Allthat, Buffo, DZ, Mixedgas and Kevin:

    Just a quick note to thank you guys for all the help in this logistic nightmare.

    Kevin is taking delivery and bringing it to SELEM.


    If ANY of you guys EVER need anything in my neck of the woods; Just ask, i'm here.


    With my best southern drawl: "I really 'preciate it and don't mean maybe neither."

  8. #18
    Join Date
    Jun 2008
    Location
    Fresno Ca
    Posts
    58

    Default

    Hi Dream Beamz
    I have the same situation as you do. I have an 88a ps with a Cooper/Lexel 95-2 tube. I have run it down with mixedgas help to either the pass-bank or the control card. I found all the parts except the LM301a on Amazon.com from American Semiconductor Inc.. I just searched for each part # and it came up with them. I even found the 1N823a there. If you want to see my system I have put a bunch of pictures on the FTP site under /Pics/cooper lexel 88a ps 95-2 head. If you want the url's for the parts send me back an e-mail and I will send them to you.
    Steve Wall, Fresno Ca.
    Last edited by Fotobysw; 08-12-2009 at 17:13. Reason: spelling

  9. #19
    Join Date
    Jun 2006
    Location
    Charlotte, NC
    Posts
    1,127

    Default

    Quote Originally Posted by Fotobysw View Post
    Hi Dream Beamz
    I have the same situation as you do. I have an 88a ps with a Cooper/Lexel 95-2 tube. I have run it down with mixedgas help to either the pass-bank or the control card. I found all the parts except the LM301a on Amazon.com from American Semiconductor Inc.. I just searched for each part # and it came up with them. I even found the 1N823a there. If you want to see my system I have put a bunch of pictures on the FTP site under /Pics/cooper lexel 88a ps 95-2 head. If you want the url's for the parts send me back an e-mail and I will send them to you.
    Steve Wall, Fresno Ca.
    I have all the parts in hand thanks though

  10. #20
    Join Date
    Aug 2008
    Location
    the hills
    Posts
    983

    Default

    HERE is a small video for those that didn't see it at SELEM.

    Sorry for the crappy vid/audio. Snagged it from the cell phone. Nowhere near the quality of a 300evil video.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •