Page 3 of 5 FirstFirst 12345 LastLast
Results 21 to 30 of 46

Thread: It's done! Finally!!

  1. #21
    Join Date
    Aug 2007
    Location
    Under a rock in Cambridge UK
    Posts
    1,353

    Default

    Quote Originally Posted by daedal View Post

    That 635 sure did get a makeover!

    --DDL
    Yes, I noticed it had lost a fair bit of weight

    Mark

  2. #22
    Join Date
    Jan 2008
    Location
    Napa, Ca
    Posts
    204

    Default

    Looks like I will be replacing the red and green lasers in this projector. They just aren't strong enough. I don't know why or how but they are not the 300mW that they are supposed to be....not even close. Plus I lose 50% of the green after it gets through the optics.

  3. #23
    Join Date
    Oct 2006
    Location
    Central Florida
    Posts
    7,067

    Question

    Did you get 5 volts to the blanking leads? I remember that thing at FLEM and it was giving the Kvant a run for its money.

  4. #24
    Join Date
    Jan 2008
    Location
    Napa, Ca
    Posts
    204

    Default

    Yeah I gave it 3 volts, then 4 volts then 5 volts and even 6 volts.

  5. #25
    Join Date
    May 2007
    Location
    Orlando, FL
    Posts
    1,090

    Default

    Something's definitely not right... and I can't get a hold of Yobresal today...

    --DDL
    I suffer from the Dunning–Kruger effect... daily.

  6. #26
    Join Date
    Aug 2008
    Location
    the hills
    Posts
    983

    Default

    Quote Originally Posted by allthatwhichis View Post
    Did you get 5 volts to the blanking leads? I remember that thing at FLEM and it was giving the Kvant a run for its money.
    Something isn't right if that is the one I saw at FLEM, Mo.

    It looked really really good.

  7. #27
    Join Date
    Jan 2008
    Location
    Napa, Ca
    Posts
    204

    Default

    Yeah it looks really good. The red and green lasers though are only putting out 100mW each before optics. I wish I could figure that one out.

  8. #28
    Join Date
    Jan 2009
    Posts
    1,622

    Default

    I'm curious about something, Yobresal.. You recently sold be a ~500mW RGB. At the time you mentioned how the red and green modules weren't up to spec on that system either. I have since metered them each before optics and they are all over spec.. Do you think it's possible there is a problem with your meter or methods? I'm sure that has already occurred to you, but I find it weird that the red and green modules are the problem here just like they were the problem in the system you sold me.

  9. #29
    Join Date
    Jan 2008
    Location
    Napa, Ca
    Posts
    204

    Default

    Well that's a usefully information I could have used a while ago. If this is the case then my problem is external from the projector. It must be my fb3 or laptop bus port. My laser meter is perfect. The flaw in my testing the voltages are probably due to the multimeter instead of an osciliscope. Maybe I need to send my FB3 out to someone for testing. Thanks for letting me know electro, looks like you got a Heck of a deal then eh? : )
    Any volunteers?

  10. #30
    Join Date
    Oct 2006
    Location
    Central Florida
    Posts
    7,067

    Question

    Do you need to send the FB3 or power meter? Assuming you have an external 5V supply and are using that on your laser blanking leads, the only suspects are the lasers or the meter. If you are using the FB3 to try and get a full power beam to measure then try moving the red or green to the blue ILDA pins and measure from there. Assuming your blue is producing what it should.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •