Page 4 of 5 FirstFirst 12345 LastLast
Results 31 to 40 of 50

Thread: Hello and inherited laser help

  1. #31
    Join Date
    Oct 2009
    Location
    Eindhoven, The Netherlands
    Posts
    921

    Default

    Quote Originally Posted by ElektroFreak View Post
    If it's tinted slightly blue it's an IR filter, but that should be unnecessary with that laser. I'd remove it ASAP since it's just costing you power and if it's not AR coated it could actually be damaging the unit.
    On the other hand, if the laser module itself (inadvertedly) doesn't have an IR filter built in, you could be exposing yourself and potential audiences to hazardous 1064nm laser radiation. Personally, I'd have a serious check back on that before you remove the glass filter permanently.

    (How to detect whether the laser already has an IR filter is already descibed above. )

  2. #32
    mixedgas's Avatar
    mixedgas is offline Creaky Old Award Winning Bastard Technologist
    Infinitus Excellentia Ion Laser Dominatus
    Join Date
    May 2007
    Location
    A lab with some dripping water on the floor.
    Posts
    10,114

    Default

    I'd call laser quantom and get specs on the entertainer series before I did anything to that laser, at one time that module was 9,000$ new.

    Steve
    Qui habet Christos, habet Vitam!
    I should have rented the space under my name for advertising.
    When I still could have...

  3. #33
    Join Date
    Oct 2009
    Location
    Eindhoven, The Netherlands
    Posts
    921

    Default

    Quote Originally Posted by mixedgas View Post
    I'd call laser quantom and get specs on the entertainer series before I did anything to that laser, at one time that module was 9,000$ new.

    Steve
    The glass filter is external (see the photos), so removing that wouldn't do any harm to the module. It might even do more good, as ElektroFreak said, the glass might not be AR coated.

    As long as you keep the screw-driver away from the module and PSU covers itself (and keep the thing OFF while tinkering), I don't see how you could inflict any serious damage. (OK, dropping it, but that's beyond the scope of productive tinkering!)

  4. #34
    Join Date
    Jan 2009
    Posts
    1,622

    Default

    Actually, the design of that module should prohibit all but trace amounts of IR from escaping. I don't think that those are linear cavities, so the internal optics should be coated to reflect all IR back into the cavity rather than out of the aperture.

  5. #35
    Join Date
    Nov 2009
    Posts
    24

    Default

    I've just found a video of the last time the laser was used 2 years ago

    http://www.youtube.com/watch?v=V4p_XxZ4vM4

    Tis the big green one there. Looks quite good and powerful actually, especially as there doesn't seem to be tonnes of smoke.

  6. #36
    Join Date
    May 2008
    Location
    nerdtown, USA
    Posts
    1,165

    Default

    Woah there. That laser is way too powerful to be scanning the crowd like that; take serious care with that thing once you get it going. You will need to measure the divergence and power, and use this information to calculate (carefully!) the minimum safe distance for people to be getting in the beam.

  7. #37
    Join Date
    Jan 2007
    Location
    Yorkshire, UK
    Posts
    4,584

    Default

    Hi Sam

    It looks as though you're getting bitten by the laser bug

    There is i'm sure, a temptation to want to rush into getting the laser up and running, and that's fine

    You have determined that the laser actually works, and that's a good thing. You have a superb quality laser there. As i'm sure you've been told already, lasers should be treated with some respect, especially as you are dealing with something of unknown power (Well, I guess you know it's <1watt from the labelling).

    I would advise you to try and find a local laser enthusiast with a power meter. I think you said you were from London area. If that's the case there are quite a few forum members in that locality who i'm sure would be prepared to meet you and measure your lasers power.

    Once you know the true power you know exactly what you're dealing with. Next, I would carefully remove the laser module from the outer casing, put it out of harms way and give the outer case a good dusting down. You can then make a decision whether or not to get a new case or use the existing one.

    Now you need a set of scanners (Galvos). I think I already mentioned to contact Rob (Stanwax) here on the forum. Rob is one of the nicest guys you will ever meet and he'll be able to give you some good advice. He's also the UK agent for Laserwave lasers as well as other products, including scanners etc.

    Wiring it all up may seem a bit daunting, but there are plenty of folks on here with brains the size of planets who can offer you good advice at every step of the way. All you need to do is ask. If you're anything like me (I dislike anything to do with elecktrickery as i'm not very good at it ) you may want to get someone to do the build for you. Again, there are plently of folks here that would be prepared to do that for you.

    In the meantime it's worthwhile trying to read a few threads on laser safety. A 1watt laser is capable of instantly blinding someone if they take a direct hit in the eye with the raw beam, so you need to be careful where you're pointing the thing. Incidentally pointing it up into the sky is a big no no, so try to resist the temptation, especially round London with all its airports.

    Above all have fun. This is a great hobby and before you know where you are you'll have amassed a few other lasers, have a full RGB rig and an empty wallet

    Cheers

    Jem
    Quote: "There is a theory which states that if ever, for any reason, anyone discovers what exactly the Universe is for and why it is here it will instantly disappear and be replaced by something even more bizarre and inexplicable. There is another that states that this has already happened.”... Douglas Adams 1952 - 2001

  8. #38
    Join Date
    Jan 2007
    Location
    Yorkshire, UK
    Posts
    4,584

    Default

    Quote Originally Posted by White-Light View Post
    That said, Heroic is exactly right in what he said ...


    Err... I think perhaps you meant "what She said"

    Heroic is in actual fact an incredibly intelligent young lady

    Jem


    Edit: .... Whoa Al... Where did your post go
    Quote: "There is a theory which states that if ever, for any reason, anyone discovers what exactly the Universe is for and why it is here it will instantly disappear and be replaced by something even more bizarre and inexplicable. There is another that states that this has already happened.”... Douglas Adams 1952 - 2001

  9. #39
    Join Date
    Nov 2009
    Posts
    24

    Default

    Thanks for that Jem, due to it being xmas I am reading up on the forum rather than buying just because I don't have much money left lol, big families are hexpensive.

    Anyways, I'm trying to read up on the basics of a projector ie sorta like the idiots guide to building a laser projector, unfortunately I've not found much yet so I've just been reading what all the parts and terms are courtesy of the various sites that sell such stuff. Any good threads spring to mind?

    As for crowd scanning, the youtube video shows it above people's heads, I thought crowd scanning was when you scan over people?

  10. #40
    Join Date
    Jan 2009
    Posts
    1,622

    Default

    As long as the beams never come close enough for any audience members to come into contact with the beam anywhere in the venue, even if they are jumping or dancing, then it's not crowd scanning.

    But in your video beams are coming down into the crowd, so that is an example of crowd scanning. Definitely not a good idea with that laser.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •