Page 2 of 5 FirstFirst 12345 LastLast
Results 11 to 20 of 44

Thread: CNI baby OEM modules

  1. #11
    Join Date
    Jul 2007
    Location
    west sussex uk
    Posts
    2,280

    Default game on

    game on

  2. #12
    Join Date
    Dec 2006
    Location
    Essex, UK
    Posts
    8,647

    Default

    rules are 1x 532nm module, 2x 405nm diodes and 2x 660nm diodes

    **update**

    also scanners and not 15k as they only come with one amp
    Eat Sleep Lase Repeat

  3. #13
    Join Date
    Jul 2007
    Location
    west sussex uk
    Posts
    2,280

    Default no rules

    Quote Originally Posted by andy_con View Post
    rules are 1x 532nm module, 2x 405nm diodes and 2x 660nm diodes

    **update**

    also scanners and not 15k as they only come with one amp
    but i built mine with dt25's yur just sayin that because you got dual amp scanners
    i think change it to it has to display a perfect ilda test pattern @30k 15deg
    that will put out using cheap scanners
    there should be just one rule, minimum of 600mw outputpower

  4. #14
    Join Date
    Dec 2006
    Location
    Essex, UK
    Posts
    8,647

    Default

    hahaha to be fair ive just been adding up the cost of building another tiny projector and i cant afford it. although i have done measurements for a very small projector.

    we will see
    Eat Sleep Lase Repeat

  5. #15
    Join Date
    Oct 2009
    Location
    Eindhoven, The Netherlands
    Posts
    921

    Default

    Quote Originally Posted by badger1666 View Post
    but i built mine with dt25's yur just sayin that because you got dual amp scanners
    i think change it to it has to display a perfect ilda test pattern @30k 15deg
    that will put out using cheap scanners
    there should be just one rule, minimum of 600mw outputpower
    Hey, if you supply me the lasers and scankit, I'm in!

    Otherwise it's going to be a 'budget war' Formula 1-style... I mean, if you have access to a micron-accurate method of manufacturing and a 3D printer, this is going to be a breeze.

    Would love to throw a laser building contest, just make it fair. And award extra points for things like best beam profile, modulation and colour balance -- so fat reds and jellybeaning greens will deduct!

  6. #16
    Join Date
    Jul 2007
    Location
    west sussex uk
    Posts
    2,280

    Default to be fair

    hey andy to be fair i will leave the same space around my single amp that would be used by two scanpro 30 amps,
    funny enough thats the same as my dt25 amp give or take 5mm

  7. #17
    Join Date
    Jul 2007
    Location
    west sussex uk
    Posts
    2,280

    Default winner

    Quote Originally Posted by Stoney3K View Post
    Hey, if you supply me the lasers and scankit, I'm in!

    Otherwise it's going to be a 'budget war' Formula 1-style... I mean, if you have access to a micron-accurate method of manufacturing and a 3D printer, this is going to be a breeze.

    Would love to throw a laser building contest, just make it fair. And award extra points for things like best beam profile, modulation and colour balance -- so fat reds and jellybeaning greens will deduct!
    yeah and the winner gets to keep all the other entrys lol

  8. #18
    Join Date
    Dec 2006
    Location
    Essex, UK
    Posts
    8,647

    Default

    the current size of mine is 240mm by 190mm by 100mm, ive drawn some rough plans to half that size. but i cant afford to buy all the parts needed at the moment. but we will see what happens...
    Eat Sleep Lase Repeat

  9. #19
    Join Date
    Dec 2006
    Location
    denver,co
    Posts
    1,078

    Default

    I would be in too. Although I can't even think about it for another two months or so. And I think it needs to be totally self contained. power supplies, dac or ilda input, full on ready to go.

    chad


    When the going gets weird, the weird turn pro.


  10. #20
    Join Date
    May 2009
    Location
    UCSB
    Posts
    715

    Default

    I might be able to enter, but it would be for the laser only, it would ultimately be paired with some homebrew galvos my friend is working on.

    In any case, my current best is this little guy:
    rgb3..JPGprojector..JPGprojection..JPG
    The main project was the laser head, the projector was done just as an afterthought for a school project, with some $5 galvos and a microprocessor to feed them random data.

    It measures 50x50x25mm (excluding the mounting feet which would expand it another 25mm), and is loaded with
    red - SLD1238JL - 100mw
    violet - PHR-803T - 100mw
    green - Ledshopppe 50mw pointer - 60mw

    So it does just about 250mw, but I used the cheapest diodes I could get my hands on. I am considering making one with dual diodes, although if I can't make the PBS cubes out of my sleds work acceptably well I may skip it and stick with the simple system.

    The main issue I have is the green, I still need to try and characterize the ledshoppe modules, but as it was there was terrible jellybeaning going on, and the power was super unstable. With a tec I could at least get the power stable, but I am not sure that there is much I can do about the jellybeaning.

    Has anyone done a comprehensive review of the CNI 12mm green modules? I am tempted to buy one to compare to the ledshoppe ones, but for almost $200 for a 50mw its pretty pricy (so far total cost of the project has been only slightly more than that). On that note, what is considered 'acceptable' in an application like this? Is a rise time of a ms just something you live with with DPSS?

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •