Page 4 of 5 FirstFirst 12345 LastLast
Results 31 to 40 of 43

Thread: Another Sextuple 1.2watt red build

  1. #31
    Join Date
    Feb 2008
    Location
    Northern Indiana
    Posts
    921

    Default

    25deg differential is really not that big if you think about it. The inside temp of a auto can easily reach 50deg. cooling the combiner 25deg to 0deg can have the same effect. Try taking a blow torch to the underside of you combiner to raise the temp-up then see if your beams are still aligned when it cools

  2. #32
    Join Date
    Dec 2008
    Location
    Southport, UK
    Posts
    2,746

    Default

    Quote Originally Posted by logsquared View Post
    25deg differential is really not that big if you think about it. The inside temp of a auto can easily reach 50deg. cooling the combiner 25deg to 0deg can have the same effect. Try taking a blow torch to the underside of you combiner to raise the temp-up then see if your beams are still aligned when it cools
    I think this can be overcome by by paying attention to the small things like the type of epoxy used for attaching the mirrors to the mounts for one. I've found that the rapid setting epoxies don't perform well at much over 35°C. Also monting holes need to be tight so any slippage between components during expansion and contraction is centred to the fixing points and returns to the same position, else your mounts will 'walk', use csk fixings where possible.
    http://img62.imageshack.us/img62/3985/laser.gif

    Doc's website

    The Health and Safety Act 1971

    Recklessly interfering with Darwin’s natural selection process, thereby extending the life cycle of dim-witted ignorami; thus perpetuating and magnifying the danger to us all, by enabling them to breed and walk amongst us, our children and loved ones.





  3. #33
    Join Date
    Dec 2006
    Location
    Essex, UK
    Posts
    8,647

    Default

    Quote Originally Posted by logsquared View Post
    25deg differential is really not that big if you think about it. The inside temp of a auto can easily reach 50deg. cooling the combiner 25deg to 0deg can have the same effect. Try taking a blow torch to the underside of you combiner to raise the temp-up then see if your beams are still aligned when it cools
    25 degrees in dpss and diode lasers is a big step in my eyes. as i said above there is only a few degrees difference from when off to on full power.

    i had no need to use a blow torch thanks lol.

    if your having stability issues im not surprised with the module going to 50degrees, maybe you need to apply some tecs.
    Eat Sleep Lase Repeat

  4. #34
    Join Date
    Jun 2010
    Location
    Australia
    Posts
    3,733

    Default

    Quote Originally Posted by andy_con View Post
    pfff trade secrets!

    parts -

    brass diode holders
    brass mirror mounts
    6 diodes
    flex p3 driver
    telescopics (£70)
    aluminium
    + many hours to mill, build, wire and align
    That simple hey? No whizzy hi-tech materials such as Unobtainium, Corodium or Handwavium?
    This space for rent.

  5. #35
    Join Date
    Dec 2006
    Location
    Essex, UK
    Posts
    8,647

    Default

    yep so simple i didnt muck up and have to start the base plate 3 time
    Eat Sleep Lase Repeat

  6. #36
    Join Date
    Feb 2008
    Location
    East Sussex, England
    Posts
    5,248

    Default

    That answer's about as useful as a third armpit...

    Not interested in what you paid, just the going rate. I've never been near a red diode so have no idea what we are looking at

  7. #37
    Join Date
    Dec 2006
    Location
    Essex, UK
    Posts
    8,647

    Default

    Quote Originally Posted by norty303 View Post
    That answer's about as useful as a third armpit...

    Not interested in what you paid, just the going rate. I've never been near a red diode so have no idea what we are looking at
    ???

    you want to know how much i sell these 6 diode red modules for?
    Eat Sleep Lase Repeat

  8. #38
    Join Date
    Feb 2008
    Location
    East Sussex, England
    Posts
    5,248

    Default

    Well, you can do that if you like, too, but I was just after a 'thumb in the air' indication of parts cost so I didn't have to go off and search lots of separate threads or hit up members for info.

    Can I have the price for one that doesn't need 3 base plates tho...

  9. #39
    Join Date
    Dec 2006
    Location
    Essex, UK
    Posts
    8,647

    Default

    Quote Originally Posted by norty303 View Post
    Well, you can do that if you like, too, but I was just after a 'thumb in the air' indication of parts cost so I didn't have to go off and search lots of separate threads or hit up members for info.

    Can I have the price for one that doesn't need 3 base plates tho...

    sorry but you will have to get the parts cost your self. people are very kind and sometimes give me discount, plus i buy bulk of some parts so get a small discount.

    the last 6 diode build and this one both sold for £500.

    cheers
    Eat Sleep Lase Repeat

  10. #40
    Join Date
    Feb 2008
    Location
    Northern Indiana
    Posts
    921

    Default

    Quote Originally Posted by andy_con View Post

    if your having stability issues im not surprised with the module going to 50degrees, maybe you need to apply some tecs.
    It's not at 50deg under normal operation! Its when the laser is transported or stored where the temperature may vary that was causing my problems before I switched mounts. My combiner could sit for weeks indoors and not move a bit. After a long car ride or some time in a elevated temp situation the beams would move a bit (about .1-.2 mRAd). And that can easily add up with a lot of beams.

    I have the temperature diff. hysteresis sorted now with a completely different mount scheme. I am waiting for the rest of my diodes to come from china. When they arrive I will probably make a new post about the mechanics I am using.

    The only reason I use a blow torch (i honestly do) is because my temp controller set-up could only put out 25watts. So, to exaggerate real world conditions I would rapid heat the base with a torch.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •