Just rig a "disable" switch on your shutter, which would allow you to generate a full-power beam for warm-up without a beam actually leaving the projector.
In lieu of that, rig a metal plate (with a flat finish to prevent back reflection) to cover the beam aperture (which is a good idea anyway, since it could help protect the scanners and other optics in the aperture during transport.).
This plate would act as a beam mask, and would also allow you to generate a full-power beam without the beam actually leaving the projector.
I've used both methods, and they work fine.
Chances are, your lasers in your projector are not (hopefully!) strong enough to punch through the metal in a shutter arm or an aperture cover plate!
RR
Metrologic HeNe 3.3mw Modulated laser, 2 Radio Shack motors, and a broken mirror.
1979.
Sweet.....