Page 2 of 4 FirstFirst 1234 LastLast
Results 11 to 20 of 32

Thread: Lumia project

  1. #11
    Join Date
    Jan 2007
    Location
    Florida
    Posts
    4,382

    Default

    That's a nice effect. Why "torture" ? It looks pretty relaxing and pleasant to me ..

  2. #12
    swamidog's Avatar
    swamidog is offline Jr. Woodchuckington Janitor III, Esq.
    Join Date
    Nov 2006
    Location
    santa fe, nm
    Posts
    1,545,836

    Default

    because you're torturing light?

    i call one of my lumia creations the "lumia eggbeater"...

    Quote Originally Posted by steve-o View Post
    That's a nice effect. Why "torture" ? It looks pretty relaxing and pleasant to me ..
    suppose you're thinkin' about a plate o' shrimp. Suddenly someone'll say, like, plate, or shrimp, or plate o' shrimp out of the blue, no explanation. No point in lookin' for one, either. It's all part of a cosmic unconciousness.

  3. #13
    Join Date
    Aug 2009
    Location
    Warner Robins,Georgia
    Posts
    27

    Default

    Hey,
    That is stunning to look at.Does the cylinder have to be polished inside or reflective??Are you going to be at Selem--I would like to see one of these.

    Laserock

  4. #14
    Join Date
    Sep 2007
    Location
    Texas
    Posts
    807

    Default

    Quote Originally Posted by Laserock View Post
    Hey,
    That is stunning to look at.Does the cylinder have to be polished inside or reflective??Are you going to be at Selem--I would like to see one of these.

    Laserock
    I didn't get the impression that Nate was going to SELEM. I'll be there and will bring some torture tubes for folks to see. Other good sources for interesting effects:

    1) Architectural glass
    2) Glass crystals, both clear and mirrored
    3) Holographic foils and other material
    4) Plastic and plexiglas - warped, bubbled, etc. (cafeful - nasty fumes when making, though)
    5) Glass lenses, rods, tubes, marbles, etc.

    Combining any of the above with servos, motors and actuators can produce some wild effects. I'm working on a dual motor, crystal wheel and glass rod effect that looks promising (with speed and direction control as well).

    Greg

  5. #15
    Join Date
    Jul 2011
    Location
    Beautiful British Columbia
    Posts
    121

    Default

    I was thinking that you might arrange the 3 wheels like a clover with the middle being the 3 overlapping each other.
    Then send the beam(s) off another mirror mounted behind the 3 but mounted to another super-slow motor with the surface just off flat so that it causes the reflected beams to slowly oscillate around in the central area of the three wheels.
    Part of the time a beam would be passing through only 1 wheel, and slowly moving into 2 wheels and, if set up as such, perhaps even moving to the point where it passes through all three wheels where they overlap. A split beam or another beam would work it's way from centre outward and then back again.
    If you put a sound sensitivity into the back reflector motor you could speed up, slow down and even reverse direction based on the audio source causing a level of interaction not seen.

    But that's just a thought off the top of my head sittin' here at work watching the clock count down the last 15 minutes.

  6. #16
    Join Date
    May 2009
    Location
    Sacramento, California
    Posts
    610

    Default

    hey laserrock, A *torture tube* is ,what *I think* is a glass rod or cylinder thats been heated to its melting point, then poked with sharp objects to indent the surface,and then squashed and or twisted or any combination of those. I could be wrong tho. They are mounted on the open or long end of a slow rotating motor & the laser beam is passed thru it making a long lumia effect.
    - Shorty- I was thinking that you might arrange the 3 wheels like a clover with the middle being the 3 overlapping each other.
    Then send the beam(s) off another mirror mounted behind the 3 but mounted to another super-slow motor with the surface just off flat so that it causes the reflected beams to slowly oscillate around in the central area of the three wheels.- hey Shorty, Im going to try that idea tonight, sounds pretty dramatic.
    Gregg- I cant make it to SELEM. Ideas for Lumia are whatever you come up with. when I saw my first lumia effect at a show at the seattle science center & got my first He-Ne, the first thing I did was to go around the house and drag anything and everything glass with ripple patterns and cuts,warps and bends,in front of the beam & see what the effect was like. It drove my mom nutz, and naturally everything really expensive (crystal, stained glass, ect.) gave the best results. After trying everything in the house, I started hitting up all the thrift stores and clearing the shelves of all the clear,wavy and odd shaped glass items. cheap items,good effects and lots of pieces.
    I need to hijack Swamis lumia projector for a weekend! Hes got a fantastic setup!
    Will there be three phase!!!!

  7. #17
    Join Date
    Aug 2009
    Location
    Warner Robins,Georgia
    Posts
    27

    Default

    Hi Greg,

    I look forward to seeing you at Selem and check out these "torture tubes".I have been using "bathroom glass" for years to create ghostly affects and didn't know it was called 'lumia' but thats cool!

    Kevin

  8. #18
    swamidog's Avatar
    swamidog is offline Jr. Woodchuckington Janitor III, Esq.
    Join Date
    Nov 2006
    Location
    santa fe, nm
    Posts
    1,545,836

    Default

    here's different style of a torture tube i made a while back.. this is simply a thin walled glass pipe that i softened with a propane torch then crumpled with some pliers. i'm rotating it at about .5 rpm.



    and... since vwolf mentioned my big lumia setup:



    Quote Originally Posted by Vidal Wolf View Post
    hey laserrock, A *torture tube* is ,what *I think* is a glass rod or cylinder thats been heated to its melting point, then poked with sharp objects to indent the surface,and then squashed and or twisted or any combination of those. I could be wrong tho. They are mounted on the open or long end of a slow rotating motor & the laser beam is passed thru it making a long lumia effect.
    - Shorty- I was thinking that you might arrange the 3 wheels like a clover with the middle being the 3 overlapping each other.
    Then send the beam(s) off another mirror mounted behind the 3 but mounted to another super-slow motor with the surface just off flat so that it causes the reflected beams to slowly oscillate around in the central area of the three wheels.- hey Shorty, Im going to try that idea tonight, sounds pretty dramatic.
    Gregg- I cant make it to SELEM. Ideas for Lumia are whatever you come up with. when I saw my first lumia effect at a show at the seattle science center & got my first He-Ne, the first thing I did was to go around the house and drag anything and everything glass with ripple patterns and cuts,warps and bends,in front of the beam & see what the effect was like. It drove my mom nutz, and naturally everything really expensive (crystal, stained glass, ect.) gave the best results. After trying everything in the house, I started hitting up all the thrift stores and clearing the shelves of all the clear,wavy and odd shaped glass items. cheap items,good effects and lots of pieces.
    I need to hijack Swamis lumia projector for a weekend! Hes got a fantastic setup!
    suppose you're thinkin' about a plate o' shrimp. Suddenly someone'll say, like, plate, or shrimp, or plate o' shrimp out of the blue, no explanation. No point in lookin' for one, either. It's all part of a cosmic unconciousness.

  9. #19
    Join Date
    Sep 2007
    Location
    Texas
    Posts
    807

    Default

    I've made several torture tubes, all from borosillicate glass - test tubes work well. I've got a fair amount of tools for working with glass, both hot and cold. I'm still playing around with different effects - dimple tubes, twisted tubes (also called "toffee tubes"). Next, I want to try glass rods to see what is possible.

    We need to compare notes for our results. I'll bring what I have to SELEM and will post photos soon.

  10. #20
    Join Date
    Oct 2008
    Location
    Portland
    Posts
    1,566

    Default

    Quote Originally Posted by Displaser View Post
    I've made several torture tubes, all from borosillicate glass - test tubes work well. I've got a fair amount of tools for working with glass, both hot and cold. I'm still playing around with different effects - dimple tubes, twisted tubes (also called "toffee tubes"). Next, I want to try glass rods to see what is possible.

    We need to compare notes for our results. I'll bring what I have to SELEM and will post photos soon.
    We need to get together sometime... As soon as I get gas tanks again, I have a huge box full of boro...

    Nice work Nate, glad to see that lumia go from a battery taped to a motor at SoCaLEM to that!

    =Adam
    Support your local Janitor- not solicited .

    Laser (the acronym derived from Light Amplification by Stimulated Emissions of Radiation) is a spectacular manifestation of this process. It is a source which emits a kind of light of unrivaled purity and intensity not found in any of the previously known sources of radiation. - Lasers & Non-Linear Optics, B.B. Laud.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •