That's a nice effect. Why "torture" ? It looks pretty relaxing and pleasant to me ..![]()
That's a nice effect. Why "torture" ? It looks pretty relaxing and pleasant to me ..![]()
suppose you're thinkin' about a plate o' shrimp. Suddenly someone'll say, like, plate, or shrimp, or plate o' shrimp out of the blue, no explanation. No point in lookin' for one, either. It's all part of a cosmic unconciousness.
Hey,
That is stunning to look at.Does the cylinder have to be polished inside or reflective??Are you going to be at Selem--I would like to see one of these.
Laserock
I didn't get the impression that Nate was going to SELEM. I'll be there and will bring some torture tubes for folks to see. Other good sources for interesting effects:
1) Architectural glass
2) Glass crystals, both clear and mirrored
3) Holographic foils and other material
4) Plastic and plexiglas - warped, bubbled, etc. (cafeful - nasty fumes when making, though)
5) Glass lenses, rods, tubes, marbles, etc.
Combining any of the above with servos, motors and actuators can produce some wild effects. I'm working on a dual motor, crystal wheel and glass rod effect that looks promising (with speed and direction control as well).
Greg
I was thinking that you might arrange the 3 wheels like a clover with the middle being the 3 overlapping each other.
Then send the beam(s) off another mirror mounted behind the 3 but mounted to another super-slow motor with the surface just off flat so that it causes the reflected beams to slowly oscillate around in the central area of the three wheels.
Part of the time a beam would be passing through only 1 wheel, and slowly moving into 2 wheels and, if set up as such, perhaps even moving to the point where it passes through all three wheels where they overlap. A split beam or another beam would work it's way from centre outward and then back again.
If you put a sound sensitivity into the back reflector motor you could speed up, slow down and even reverse direction based on the audio source causing a level of interaction not seen.
But that's just a thought off the top of my head sittin' here at work watching the clock count down the last 15 minutes.
hey laserrock, A *torture tube* is ,what *I think* is a glass rod or cylinder thats been heated to its melting point, then poked with sharp objects to indent the surface,and then squashed and or twisted or any combination of those. I could be wrong tho. They are mounted on the open or long end of a slow rotating motor & the laser beam is passed thru it making a long lumia effect.
- Shorty- I was thinking that you might arrange the 3 wheels like a clover with the middle being the 3 overlapping each other.
Then send the beam(s) off another mirror mounted behind the 3 but mounted to another super-slow motor with the surface just off flat so that it causes the reflected beams to slowly oscillate around in the central area of the three wheels.- hey Shorty, Im going to try that idea tonight, sounds pretty dramatic.
Gregg- I cant make it to SELEM. Ideas for Lumia are whatever you come up with. when I saw my first lumia effect at a show at the seattle science center & got my first He-Ne, the first thing I did was to go around the house and drag anything and everything glass with ripple patterns and cuts,warps and bends,in front of the beam & see what the effect was like. It drove my mom nutz, and naturally everything really expensive (crystal, stained glass, ect.) gave the best results. After trying everything in the house, I started hitting up all the thrift stores and clearing the shelves of all the clear,wavy and odd shaped glass items. cheap items,good effects and lots of pieces.
I need to hijack Swamis lumia projector for a weekend! Hes got a fantastic setup!
Will there be three phase!!!!
Hi Greg,
I look forward to seeing you at Selem and check out these "torture tubes".I have been using "bathroom glass" for years to create ghostly affects and didn't know it was called 'lumia' but thats cool!
Kevin
suppose you're thinkin' about a plate o' shrimp. Suddenly someone'll say, like, plate, or shrimp, or plate o' shrimp out of the blue, no explanation. No point in lookin' for one, either. It's all part of a cosmic unconciousness.
I've made several torture tubes, all from borosillicate glass - test tubes work well. I've got a fair amount of tools for working with glass, both hot and cold. I'm still playing around with different effects - dimple tubes, twisted tubes (also called "toffee tubes"). Next, I want to try glass rods to see what is possible.
We need to compare notes for our results. I'll bring what I have to SELEM and will post photos soon.
Support your local Janitor- not solicited
.
Laser (the acronym derived from Light Amplification by Stimulated Emissions of Radiation) is a spectacular manifestation of this process. It is a source which emits a kind of light of unrivaled purity and intensity not found in any of the previously known sources of radiation. - Lasers & Non-Linear Optics, B.B. Laud.