Page 2 of 2 FirstFirst 12
Results 11 to 16 of 16

Thread: How to calculate MPE/divergence

  1. #11
    Bradfo69's Avatar
    Bradfo69 is offline Pending BST Forum Purchases: $47,127,283.53
    Join Date
    Jul 2010
    Location
    Wilmington, DE
    Posts
    6,207

    Default

    Also, using the software that was mentioned, 30mW with a divergence of say, 2 is 63.6 feet to answer your original post. The Reke on the other hand? Better plan on 259.7 feet. As long as your audience for the house party is a football field away, I think you're golden.
    Last edited by Bradfo69; 02-14-2012 at 19:05. Reason: oops. feet vs yards

  2. #12
    Join Date
    Feb 2012
    Posts
    4

    Default

    Hmm, honestly how dangerous is anything is class 3B (my lasers)? I was just at an event last weekend where they had 3 huge lasers filling the venue. They were easily a few watts and the closest beam contact with the audience was probably 50 feet. But here was a decent amount of fog and also a mesh screen a few feet from the lasers to display the patterns. Would any of these factors play a role in significantly reducing laser power?

  3. #13
    Join Date
    Aug 2008
    Location
    UK
    Posts
    5,704

    Default

    Quote Originally Posted by chocpretz View Post
    Hmm, honestly how dangerous is anything is class 3B (my lasers)? I was just at an event last weekend where they had 3 huge lasers filling the venue. They were easily a few watts and the closest beam contact with the audience was probably 50 feet. But here was a decent amount of fog and also a mesh screen a few feet from the lasers to display the patterns. Would any of these factors play a role in significantly reducing laser power?
    No you can't rely on fog to render your show safer. Don't forget all the calculated shows also use fog so effectively the safety data that's been built up over the years of collecting statistics as a basis for these calculations, already takes fog into account.

    You might want to read this:

    http://www.laserist.org/2009-07_Belgian-incident.htm

    Permanent eye damage from 200mw+ pointers.

    As for shows by professional companies, if they're doing them legally then there are a few tricks they can use to make exposure safe that might not be readily apparent. eg

    Beam Attenuation Mapping in the audience area in the software (where the computer automatically reduces the power as the beams scan certain areas - this change if done well can't be seen as lasers appear brighter the more directly you look along the beam so if graduated skilfully, the change in power isn't apparent)

    Safety Lenses - where lenses are used to increase the divergence of the beams to make them safer

    There is no easy way of calculating MPE as even the "simple method" is still quite complex.

    The best way of ensuring safety of the shelf, so far as that is possible, is to get a fat beam laser varianced specifically for audience scanning in the US as these can have powers up to around 30mw and due to the divergence are considered safe from a reasonable distance. Ie if you don't stick you eye on the unit! Effectively they use divergence to render the beam density down to the equivalent of 5mw. However, they are expensive.

    Other than that, you're down to going on a safety course, buying the right measurement equipment and learning to calculate MPE correctly.

    As Bradford mentioned, cheaper Chinese lasers aren't know for their reliability which poses a danger in itself without a scan failure device.

  4. #14
    mixedgas's Avatar
    mixedgas is offline Creaky Old Award Winning Bastard Technologist
    Infinitus Excellentia Ion Laser Dominatus
    Join Date
    May 2007
    Location
    A lab with some dripping water on the floor.
    Posts
    10,115

    Default

    [QUOTE=chocpretz;222788]I'm from the US. I'm aware that audience scanning is illegal here, but this is mainly for private parties/house parties.

    Laser Shows, 100 Level Course Cliff Notes:

    The government is not what you need to fear in the USA. Lawyers are, and the private Parties"/"House Parties" thing is no longer a legal dodge, whatever what you may have heard. The potential injured party will hit you far worse the the government.

    What do I mean by "potential", well people suddenly can discover their eyes have two built in natural, blind spots, in the morning. What I'm trying to say is, audience management is required. You need a simple sign at the door, lasers in use. It does not do a thing for you legally, but it avoids social issues. Also ban all pointers at your events. High power pointers generate static beams, and static beams are HAZARDOUS, as you can guess.

    If you want to add this effect to your stables, go the simple route and add two DENSE rotating XY burst gratings in front of a laser that makes less then 50 mW.

    Change colors and rotation speed. Use it for short bursts. Then work on artistics with the overhead and graphics.

    Use a quality hazer instead of aquasmog. Keep the fog machine as a fill in effect in short bursts for "Liquid Sky", which should really be called "Convective Sky". Put a fan in front of the fog machine for better dispersion.

    Looks, cool, the only real hazard is the easy to block central beam, and as long as nothing is hotter then 5-10 mW, and nothing stops moving, you can sleep safely. You use it as a teaser. Put a +1 or stronger Diopter lens after the galvo.

    Your still in violation, but the odds of a incident is nearly nil. You could use one fixed and one rotating grating. The reason for two gratings is to prevent burnthrough if a grating fails.

    You still need to make measurements.

    I'll have to dig up my math for a simple circular scan, I've posted it before.

    The search engine is overloaded with my posts. It will take me time to find the PDFs.

    Sorry for the caustic attitude, but if I have to stick to three meters up and two meters horizontal, I don't see why you should not. Dont answer that, it is a political statement.

    Let the screaming from countries where all is legal begin. But the law in my nation is still the law. If your serious, apply for the permits, join ILDA, attend LEMS (meetings) and learn. ILDA quietly lobbies for improvments in a confusing, highly charged legal situation.

    PS, I've sat through at least 6 classes over the years on how to do it safe. ILDA periodically has courses on this at meetings, and the safety classes often given at SELEM ARE TOP=NOTCH.

    Last time I checked, baseline artistics and good beat sync can easily compensate for the need for audience scanning.

    That said, I have a peer judged award for a audience scanning show. Canada is a fun place, if you do it correctly and have peer review of the power settings. My show had to be previewed and checked by the awards group at the conference. I ( And my then programming partner) won a award by the simple fact the show was synced to the music, and by the fact that I had NO animations in the show. Everything was done using built in motion effects in the software. This made it look "Different". Different is GOOD.

    Also, Darkness(tm) is a award winning effect. Try to co-ordinate with the lighting person/people.
    Having the lasers off for a while is also "Darkness"

    (The speed of Dark in a given room with no windows, is faster then the speed of light in most mediums, Physics Joke)

    If the music is 4:4 time, all you really have to do, for a good show, is have the ability to count to 16.

    OLDER WAY:
    Hint, if your software does not have projection zones, the 0 line, AKA the X axis in the drawing window, gets set at three meters or higher. All your framesets are made up so the hot stuff only exists above the 0 line. This takes considerable editing to set up.
    The safe, calculated effects, and you only need a few of them, are set up below the line.
    You script/edit your show for controlled exposure times to meet the calculated MPE.

    You'll feel better knowing you have taken the time to do it right.

    PS if your in Arizona, New York, Massachusetts, Texas, or New Jersey, get the state permits.

    If your in Arizona, live in fear.

    Thank you for asking how to do it safely. Can you rise to the challenge of doing things better?

    Peer review is good. Do not depend on what you are told by any one person, including me.

    Steve
    Last edited by mixedgas; 02-15-2012 at 07:19.

  5. #15
    Join Date
    Jun 2010
    Location
    Syracuse, NY
    Posts
    287

    Default

    Quote Originally Posted by mixedgas View Post
    If your in Arizona, live in fear.
    I hate reading this, but I will accept it as a challenge. I will not give AZ Rad any grounds to to stop my shows... even if that means putting more time into doing it right than the money is worth.. I will show AZ who's boss!!! lol.. God help me :P
    LASERS!!

    1x Homemade 500mW 405nm Projector
    1x Homemade 1.2W RGB Projector
    1x Lightspace Color Ray Series 6W RGB
    2x Lightspace Venus 2W RGB

    ZPL Lighting www.zpllighting.com

  6. #16
    Join Date
    Apr 2008
    Location
    Amsterdam, NL
    Posts
    2,098

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •