Page 2 of 3 FirstFirst 123 LastLast
Results 11 to 20 of 23

Thread: Please help with your expertise

  1. #11
    Join Date
    Jan 2013
    Location
    Los Angeles, CA
    Posts
    11

    Default

    Thank you. You made me feel less guilty for buying the software. I will certainly investigate and perhaps be able to afford a good and legal projector, and the certification in the future... I hope they keep on upgrading the software for new Operational Systems, as I see this will be a far future if a good projector and certification will cost me over 2k!

    I understand! GO WORK!!! But I would really appreciate your input, not for purchasing, but for learning more... that is... when you have the time!!!

    Thanks!

    Quote Originally Posted by Bradfo69 View Post
    What has been mentioned above is certainly true but, the one thing I will say is that you are to be commended for buying the software first and you made a very good choice - better than some other people new to lasers make. Don't regret the purchase of Quickshow - it just may be a little longer before you can afford a good, legal projector to go with it. It should also serve you well as you learn. You mentioned 4-5 shows per year so, perhaps February won't work out in time but, if you start soon, you could have your variance within a couple months and perhaps saving up a little more, a projector in the not too distant future too. X-Laser would be a very good source to investigate as they can help with both the laser and the variance.

  2. #12
    Join Date
    Sep 2007
    Location
    Texas
    Posts
    807

    Default

    Ijojo,

    Where in the US are you? There may be some PL folks near you that could help out.

    Are you handy with a soldering iron?
    "Information not shared, is information lost forever"

    Join ILDA
    Support Photonlexicon

  3. #13
    Join Date
    Jan 2013
    Location
    Los Angeles, CA
    Posts
    11

    Default

    I am in Los Angeles. I have done some electronic soldering in the past... it's been a few years but, I am sure I can get the hang of it again... I even have a cold solder... lol


    Quote Originally Posted by Displaser View Post
    Ijojo,

    Where in the US are you? There may be some PL folks near you that could help out.

    Are you handy with a soldering iron?

  4. #14
    mixedgas's Avatar
    mixedgas is offline Creaky Old Award Winning Bastard Technologist
    Infinitus Excellentia Ion Laser Dominatus
    Join Date
    May 2007
    Location
    A lab with some dripping water on the floor.
    Posts
    10,114

    Default

    I'm going to question this initial sharp response guys:

    If

    1. He does this only for his church
    2. He does not audience scan
    3. He nor His Church does not charge admission
    4. He does not advertise lasers as a event, nor even mention them in advertising etc.
    5. He does not make ANY profit.
    6. He keeps this very small scale, say 500-1000 mW and obeys the two meter and three meter rules.
    7. Everything is terminated.
    8. His church has event insurance..
    9. He applies for a variance..
    10 Its not a weekly thing.


    Whats the beef at that point? You could also send him to X-Laser with the instant variance stuff.

    Come on, this is NOT "I wanna Do Raves", or "I wanna scan at a Bar". Depending on the church, ect, this could be bordering on public service. Especially if it keeps teenagers out of various places, that would cause most of you as parents to cringe.

    Steve

  5. #15
    Bradfo69's Avatar
    Bradfo69 is offline Pending BST Forum Purchases: $47,127,283.53
    Join Date
    Jul 2010
    Location
    Wilmington, DE
    Posts
    6,207

    Default

    From a philosophical point, I agree with you. And admittedly, the chance of a CDRH representative being a member of the congregation is pretty damn slim. It's just that when someone new (in the US) comes along, the words "public" and "chinese laser" are always going to get a response about the correct and legal way to go about it.

    I also agree that if I'm doing shows in my own basement for my own enjoyment, the CDRH shouldn't have a say in that however... when you go to import said chinese laser, and customs catches it and asks you to fill out a FDA 2877 for it, there is no box to check that says "it's for personal use in my basement." You can legally import the parts and build it yourself but, as I read it, not the whole operational projector.

    I like the idea I've heard from a couple people - tell the seller to remove the power supplies and ship them separately.

  6. #16
    Join Date
    Aug 2009
    Location
    Churchill(hour S from Houston)
    Posts
    1,354

    Default

    Couldn't he get liability waivers signed in advance from all who would be attending- ala LEM?
    His plan does not sound like the kind of event that charges admission.
    He could get a REKE 500RGB ILDA for less than 300$ and do just fine with that and QS-
    He just missed a chance to get one for 200$ over at the big forum- these go on sale from time to time and there are promo code that get the final price down--- PM me for more info.


    OP- plz fill out your personal profile so we will not need to keep asking your location..

  7. #17
    Bradfo69's Avatar
    Bradfo69 is offline Pending BST Forum Purchases: $47,127,283.53
    Join Date
    Jul 2010
    Location
    Wilmington, DE
    Posts
    6,207

    Default

    Swami took care of giving you a number of excellent reasons why the first projector is a better choice than the second. I'll add a couple more. The first laser's wavelengths are 650, 532 and 445 whereas the second uses 650, 532 and 405nm. First of all, most common projectors are all going to be 532 for the green. Most of your less expensive projectors such as these are going to use 650nm for red. It's the blue and, in this case violet, where you see more variations. Keep in mind the eye sees certain wavelengths easier than others. We see green the easiest so, it doesn't take a lot of laser power to see it. As you move to the red and the blue ends of the visible spectrum, you need more laser power to create an equal amount of brightness. 405nm approachs the ultraviolet or invisible end of the spectrum so, you need a lot more power to match the other colors. It's also a wavelength that some people see very differently. As it blends with the green and red, the resulting colors will be very different than with 445 so, I would lean towards the one with 445.

    As Swami said, in the same spec they're saying air cooled and TE cooled. I would be willing to bet there are no TEC's in the box and that it's really air cooled. The chinese aren't known for their tech writing skills - hence the definition in the second projectors description of "scream show" as a color. Huh??? I'd bet many who write the ad copy couldn't tell you what a scanner speed or scan angle actually means.

    Simply from the pictures and past experience, I'm going to make an assumption and say the build quality and materials are better in the first one. The case just looks more robust. The second blue one is most assuredly a very flimsy sheet metal with terrible machining. I'd venture to say non adjustable dichros and lots of hot melt glue. The case of the first one just "looks" visually more solid and, I suspect if we had shots of the inside you would find it put together with just a little more quality. Maybe even some method of adjusting your alignments which will likely need to be done from time to time.

    Len's suggestion of a REKE 500RGB above is also a good idea. No, still not legal.... but for an inexpensive entry into the hobby and something to fool around with in your basement, it's a pretty decent little projector for $200-$300. But, at the end of the day, I'd still suggest saving up a bit more money and try to find a used X-Laser as they are probably your least expensive entry point into this hobby legally in the US.

  8. #18
    swamidog's Avatar
    swamidog is offline Jr. Woodchuckington Janitor III, Esq.
    Join Date
    Nov 2006
    Location
    santa fe, nm
    Posts
    1,545,835

    Default

    a non-commercial private church show *may* slip under the radar. think about the LEMS. they seem to be legal private non-commercial gatherings.

    Quote Originally Posted by Bradfo69 View Post
    From a philosophical point, I agree with you. And admittedly, the chance of a CDRH representative being a member of the congregation is pretty damn slim. It's just that when someone new (in the US) comes along, the words "public" and "chinese laser" are always going to get a response about the correct and legal way to go about it.

    I also agree that if I'm doing shows in my own basement for my own enjoyment, the CDRH shouldn't have a say in that however... when you go to import said chinese laser, and customs catches it and asks you to fill out a FDA 2877 for it, there is no box to check that says "it's for personal use in my basement." You can legally import the parts and build it yourself but, as I read it, not the whole operational projector.

    I like the idea I've heard from a couple people - tell the seller to remove the power supplies and ship them separately.
    suppose you're thinkin' about a plate o' shrimp. Suddenly someone'll say, like, plate, or shrimp, or plate o' shrimp out of the blue, no explanation. No point in lookin' for one, either. It's all part of a cosmic unconciousness.

  9. #19
    Join Date
    Jan 2013
    Location
    Los Angeles, CA
    Posts
    11

    Default

    Yes, but you know what... I prefer to stay with the law. Also, I didn't know about the customs getting the items... I just though of buy from USA because I just don't trust items coming from China... (scams???)

    Quote Originally Posted by Bradfo69 View Post
    From a philosophical point, I agree with you. And admittedly, the chance of a CDRH representative being a member of the congregation is pretty damn slim. It's just that when someone new (in the US) comes along, the words "public" and "chinese laser" are always going to get a response about the correct and legal way to go about it.

    I also agree that if I'm doing shows in my own basement for my own enjoyment, the CDRH shouldn't have a say in that however... when you go to import said chinese laser, and customs catches it and asks you to fill out a FDA 2877 for it, there is no box to check that says "it's for personal use in my basement." You can legally import the parts and build it yourself but, as I read it, not the whole operational projector.

    I like the idea I've heard from a couple people - tell the seller to remove the power supplies and ship them separately.

  10. #20
    Join Date
    Jan 2013
    Location
    Los Angeles, CA
    Posts
    11

    Default

    I will try to fill the profile!

    Quote Originally Posted by hakzaw1 View Post
    Couldn't he get liability waivers signed in advance from all who would be attending- ala LEM?
    His plan does not sound like the kind of event that charges admission.
    He could get a REKE 500RGB ILDA for less than 300$ and do just fine with that and QS-
    He just missed a chance to get one for 200$ over at the big forum- these go on sale from time to time and there are promo code that get the final price down--- PM me for more info.


    OP- plz fill out your personal profile so we will not need to keep asking your location..

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •