Page 2 of 4 FirstFirst 1234 LastLast
Results 11 to 20 of 34

Thread: Buying first RGB laser

  1. #11
    Join Date
    Aug 2008
    Location
    UK
    Posts
    5,704

    Default

    It probably would help if you mentioned what your project is and thus what the use for the laser is, as you seem to have picked anything from 1.7W - 5W which kind of indicates to me that you're not really sure yourself what you need.

    Also, don't want to come in heavy, but realise the potential dangers of units of these powers. If misdirected they can damage or take your eyesight faster than you can blink (literally!).

  2. #12
    Join Date
    Jun 2013
    Location
    Sydney, Australia
    Posts
    244

    Default

    Quote Originally Posted by White-Light View Post
    It probably would help if you mentioned what your project is and thus what the use for the laser is, as you seem to have picked anything from 1.7W - 5W which kind of indicates to me that you're not really sure yourself what you need.

    Also, don't want to come in heavy, but realise the potential dangers of units of these powers. If misdirected they can damage or take your eyesight faster than you can blink (literally!).
    I guess I am looking for around a 2w laser but you guessed it i'm not really sure what I am after, hence being on here on a fact finding mission! :-)

    I am looking to create an interactive art piece, projecting live movements fed via webcam in real time. I would also like to help fund the project by putting on some light shows for gigs and events, perhaps beam shows and animated effects...

    The venues are unknown at this stage, so it's hard to tell of exact power of laser, but i am aware of the real dangers they posses and have downloaded the HSE guide and am also looking into a course on lasers for entertainment, held in London next month.

    Everyone's help on here has been a great help!

  3. #13
    Join Date
    Aug 2008
    Location
    UK
    Posts
    5,704

    Default

    Don't know if that's the one you're looking at, but its a good company and the director comes on here:

    http://lvrlimited.com/laser-safety-training.php

  4. #14
    Join Date
    Jun 2013
    Location
    Sydney, Australia
    Posts
    244

    Default

    Quote Originally Posted by White-Light View Post
    Don't know if that's the one you're looking at, but its a good company and the director comes on here:

    http://lvrlimited.com/laser-safety-training.php
    Yes, that's the one i was looking at! Nice to hear good reports about them, have you or anyone been on it? How often are they run, not sure if i can make the next one in June...

  5. #15
    Join Date
    Dec 2012
    Location
    Sweden
    Posts
    5

    Default

    You could take a look at Lightspace's products, they have some analog projectors that you might be interested in.
    Here's a link to their website: http://www.eightonlight.cn
    Send them an Email and see what they have to recommend for your budget!

  6. #16
    Join Date
    Jun 2013
    Location
    Sydney, Australia
    Posts
    244

    Default

    Quote Originally Posted by White-Light View Post
    Don't know if that's the one you're looking at, but its a good company and the director comes on here:

    http://lvrlimited.com/laser-safety-training.php
    Completed the course, was very informative and definitely worth going on! Thanks.

  7. #17
    Join Date
    Jun 2013
    Location
    Sydney, Australia
    Posts
    244

    Default

    First laser projector bought! Massive thankyou to everyone on here who guided me through the big learning curve of lasers and helping me decide.

    I have ordered an N-RGB3000 with DT40 pro's, Laserwave analogue lasers and Quickshow from Goldenstarlasers, with a lot of helpful advice from Winni. I will update when it arrives...... :-)

  8. #18
    Join Date
    Jun 2013
    Location
    Sydney, Australia
    Posts
    244

    Default

    So...... the new laser arrived today! I have fired it up and been playing with some of the settings and will put up a review when I've had a better chance to use it properly, but while setting it up I have a few issues.
    The main problem is the scanners it seems, I have set up the scanners with Quickshow and an ILDA test pattern and I can only get around 27kpps on the DT40's? The frame rate seems to drop a lot too while playing some graphics and while displaying the digital clock for instance the image is very flickery? Any ideas?

  9. #19
    swamidog's Avatar
    swamidog is offline Jr. Woodchuckington Janitor III, Esq.
    Join Date
    Nov 2006
    Location
    santa fe, nm
    Posts
    1,545,835

    Default

    what's your scan angle?


    Quote Originally Posted by steviobee View Post
    So...... the new laser arrived today! I have fired it up and been playing with some of the settings and will put up a review when I've had a better chance to use it properly, but while setting it up I have a few issues.
    The main problem is the scanners it seems, I have set up the scanners with Quickshow and an ILDA test pattern and I can only get around 27kpps on the DT40's? The frame rate seems to drop a lot too while playing some graphics and while displaying the digital clock for instance the image is very flickery? Any ideas?
    suppose you're thinkin' about a plate o' shrimp. Suddenly someone'll say, like, plate, or shrimp, or plate o' shrimp out of the blue, no explanation. No point in lookin' for one, either. It's all part of a cosmic unconciousness.

  10. #20
    Join Date
    Jun 2013
    Location
    Sydney, Australia
    Posts
    244

    Default

    How can I tell in QS?

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •