Page 2 of 4 FirstFirst 1234 LastLast
Results 11 to 20 of 33

Thread: New Reds on the block!

  1. #11
    Join Date
    Jul 2008
    Location
    Maryland
    Posts
    1,691

    Default

    nice build.. keep us updated on the price..
    I built one of these so i know how much it cost
    Quis custodiet ipsos custodies?
    Solid State Builders Group

  2. #12
    Join Date
    May 2007
    Location
    Orlando, FL
    Posts
    1,090

    Default

    Quote Originally Posted by Phritzler View Post
    Hello!
    Sorry, but really 200mW CW Diodes with good beamdata aren´t exists yet.
    The highest power are the open-can Mitsubishi diodes with 150mW CW and 400mW pulse.The normal mitsubishi diodes (closed-can) with the window have 130mW CW and 350mW pulse. Yes, there exist´s diodes from 200mW-up of watts, but they have a wide stripe emitter and bad divergences on the aixis.
    Greetings,
    Phil
    Hiya Phil,

    Thank you for comment.

    I have a diode that I buy directly from a manufacturer that makes 200mW CW and 440mW pulse power. These have been tested by myself and several other members. They do not like to be pushed hard, but will last a very long time at 200mW.

    Also, please note that this is information gathered through testing and the specs are provided by the manufacturer in China, and as such, I only report what I am told.

    Unlike the striped diodes, these are excellent diodes with a really good beam spec. The resulting beam has a faint stripe across the beam, but that can be tamed and will not affect the output once it reflects off the scanners.

    Thank you;
    DDL

  3. #13
    Join Date
    May 2007
    Location
    Orlando, FL
    Posts
    1,090

    Default

    Quote Originally Posted by buffo View Post
    Phil;

    It depends on which wavelength you're talking about. I've seen 650 nm and 660 nm diodes that can run 225 mw for extended periods (1000's of hours) with beam specs like 2mm diamter and 1 mrad divergence. Optics play a part in reaching that goal, but we're not talking anything fancy here.

    As an example, Marconi used to sell his famous Maxyz modules on E-bay. Quite a few members (including me) are using them in their projectors. Those modules would make between 200 and 250 mw of 658 nm red. They have outstanding beam quality and they've been available for at least 4 years, if not longer.

    I also know of at least two people that have gotten similar results with 635 nm diodes at up to 300 mw of power. Granted, the diodes are much more expensive than the one's in a Maxyz module, and the optical train required to tame the beam has quite a few elements in it, but it *can* be done - for a price. (Best spec I've seen so far has been 4 mm beam w/ 1.1 mrad divergence.)

    So yeah, 635 nm is the hard one to tame, but it's still possible if you're willing to spend the money on the optics. As for 650 nm and 660 nm, I'd say it's relatively easy to get a good beam at up to 250 mw.

    Adam
    Thank you Adam, I could not agree more. 635 is a pain in the neck, but the 650-660nm range is a great alternative for high power. It also has a nice deep red color

    --DDL

  4. #14
    Join Date
    Jan 2006
    Location
    Charleston, SC
    Posts
    2,147,489,632

    Smile

    I gotta admit it Mo - you've got some fine work there. Especially now that Marconi seems to have dropped off the face of the earth, it's refreshing to see other people coming up with alternatives to the verenable Maxyz module.

    And yeah, the real key is to get a 200-300 mw 635 unit with similar beam specs. Like I said, I know of 2 people that have done it, but thus far it's *not* cost effective. (Nor is it trivial to assemble. One solution had seven optical elements!)

    Looking forward to seeing your dual red unit inside a full blown projector at FLEM in a few months. (Assuming this venue I found in Maitland pans out, that is!)

    Adam

  5. #15
    Join Date
    May 2007
    Location
    Orlando, FL
    Posts
    1,090

    Default

    Quote Originally Posted by keeperx View Post
    nice build.. keep us updated on the price..
    I built one of these so i know how much it cost
    Nice!

    Any pictures of your build? I'm interested in seeing how yours looks

    I will keep everyone updated as these develop more and the pricing gets decided better.

    --DDL

    P.S. For those who may not know me, please rest assured that each module will come with a supplied power graph and a settings documentation. Each module will come with a 1 year warranty provided by myself!

  6. #16
    Join Date
    May 2007
    Location
    Orlando, FL
    Posts
    1,090

    Default

    Quote Originally Posted by buffo View Post
    I gotta admit it Mo - you've got some fine work there. Especially now that Marconi seems to have dropped off the face of the earth, it's refreshing to see other people coming up with alternatives to the verenable Maxyz module.

    And yeah, the real key is to get a 200-300 mw 635 unit with similar beam specs. Like I said, I know of 2 people that have done it, but thus far it's *not* cost effective. (Nor is it trivial to assemble. One solution had seven optical elements!)

    Looking forward to seeing your dual red unit inside a full blown projector at FLEM in a few months. (Assuming this venue I found in Maitland pans out, that is!)

    Adam
    Yikes! 7? That must have some massive losses due to these optics!

    FLEM you say? Maitland? I was asking around to try and find us a warehouse to use, unfortunately no one has anything available in Orlando... I will help as much as I can to get this going, please let me know.

    Regards;
    DDL

  7. #17
    Join Date
    Jul 2008
    Location
    Maryland
    Posts
    1,691

    Default

    just realized, you mounted the optics wrong. there is NO adjustment for the laser that goes thru the cube.

    please see here
    http://photonlexicon.com/forums/showthread.php?t=5949
    Quis custodiet ipsos custodies?
    Solid State Builders Group

  8. #18
    Join Date
    Feb 2007
    Location
    Herts, UK
    Posts
    1,254

    Default

    Quote Originally Posted by keeperx View Post
    just realized, you mounted the optics wrong. there is NO adjustment for the laser that goes thru the cube.
    Why is it wrong? either layout will work fine.

  9. #19
    Join Date
    Jul 2008
    Location
    Maryland
    Posts
    1,691

    Default

    think about the MM1s and what they provide.

    trust me we tried it both ways. the way he has it allows for adjusting only 1 beam. the other just goes straight thru.
    Quis custodiet ipsos custodies?
    Solid State Builders Group

  10. #20
    Join Date
    Oct 2006
    Location
    Central Florida
    Posts
    7,067

    Lightbulb

    My dual red set up has no adjustment for the laser going through the cube. Only the bent beam is adjustable. I just set my scanners to the height of the through beam and adjust all the rest for near field alignment and it is all good.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •