Page 8 of 11 FirstFirst ... 4567891011 LastLast
Results 71 to 80 of 108

Thread: Lumia Extravaganza

  1. #71
    Join Date
    Nov 2008
    Location
    San Marcos, Texas, USA
    Posts
    144

    Default 8 channel DMX Driver

    Quote Originally Posted by mikkojay View Post
    Hey Tim: That link to your show pics is really cool! I love how the stars at the same time make the Lumia look even more like nebulas. Feel free to add some projector pics to this thread! I would be curious to know some more details about the DMX converter you used (on the projector side)
    -Mike
    Projector pics coming later - the DMX device I use is from LaserAnimation in Berlin - they have an 8 channel DMX Driver - use it to drive GM20's and motors. I'd give you a link to look at but nothing on their website about it. I know about it because I sell their stuff.

    Tim

  2. #72
    Join Date
    Sep 2007
    Location
    Omaha, NE
    Posts
    769

    Default Still Experimenting

    Well, disregard that bearing arrangement with the O-Ring belts! I tried it out tonight, and no way is that gonna cut it. Here's what happens when your bearings suck and you use boing boing rubber bands for belts:
    SmmmmmmmooooooooooootttttttttthhhhhhhboinkSmmmmmmm ooooooooooootttttttttthhhhhhhboink
    SmmmmmmmooooooooooootttttttttthhhhhhhboinkSmmmmmmm ooooooooooootttttttttthhhhhhhboink
    SmmmmmmmooooooooooootttttttttthhhhhhhboinkSmmmmmmm ooooooooooootttttttttthhhhhhhboink

    If I said screw it and left it that way, I know it would kill my buzz every time I watch it! Sooo, I think I am going to say screw the bearing idea and just do some simple bushings and a #25 chain drive.

    I also tried a few more objects from around the house- my favorite ended up being a plain shot glass. The angle where it started really getting trippy would be tough to mount, but the effect would be worth figuring it out. Some of the coolest mottled/speckled transitions were from funk in the glass- good thing I suck at doing dishes!

    -Mike


  3. #73
    Join Date
    Nov 2007
    Location
    SoCal / San Salvador / NY
    Posts
    4,018

    Default

    Hey Aaron -

    Quote Originally Posted by allthatwhichis View Post
    Can you post a "how to" for the device that "knob" is attached to?
    It's actually a GIANT 'diamond' crystal - see HERE... ...I think we used a 3" one, for this unit...

    I'll be on the 'drawing warpath' again, tomorrow - I'll see if I can whip up a 'sketch'... basically, it is the 'diamond', industrial-strength-
    epoxied to a 'drum', lined with mirror-like mylar, mounted to the shaft of a 1/2 RPM gear-motor, in a box, with a switch, for power-in from a 12V DC 'wall-wart' ... Not much too it, really...

    Anyhoo, I'll see what I can do...
    j
    ....and armed only with his trusty 21 Zorgawatt KTiOPO4...

  4. #74
    Join Date
    Jul 2007
    Location
    Knoxville, TN, USA
    Posts
    3,154

    Default

    Just a personal observation -

    This is turning into one of the coolest, friendliest threads that's been started on PL in quite some time!!

    Threads like this is why I decided to join you crazy laser freaks in the first place!!
    RR

    Metrologic HeNe 3.3mw Modulated laser, 2 Radio Shack motors, and a broken mirror.
    1979.
    Sweet.....

  5. #75
    mixedgas's Avatar
    mixedgas is offline Creaky Old Award Winning Bastard Technologist
    Infinitus Excellentia Ion Laser Dominatus
    Join Date
    May 2007
    Location
    A lab with some dripping water on the floor.
    Posts
    10,119

    Default

    If you live in Ohio, Pat Cataan's have a similar huge diamond for about 3-5$. Not quite waterford, but OK.

    If need be, I can become Steve's discount diamonds for a one time group buy, IF they still have them.

    costs would be whatever PCs is getting for the stone plus 1.75 for the box plus 4.50 for the postage plus about 3$ for shipping materials plus 1$ for gas.

    Steve

  6. #76
    Join Date
    Jul 2007
    Location
    Knoxville, TN, USA
    Posts
    3,154

    Default

    Projector layout question -

    If incorporating several lumia effects requiring beam rerouting with actuators, what do you normally use as an aimpoint for the different effects? Do you try to angle your actuator / lumia mounting so all beam effects terminate at the same relative scrim location, or just let everything shoot perpendicular from the projector?
    RR

    Metrologic HeNe 3.3mw Modulated laser, 2 Radio Shack motors, and a broken mirror.
    1979.
    Sweet.....

  7. #77
    mixedgas's Avatar
    mixedgas is offline Creaky Old Award Winning Bastard Technologist
    Infinitus Excellentia Ion Laser Dominatus
    Join Date
    May 2007
    Location
    A lab with some dripping water on the floor.
    Posts
    10,119

    Default

    since you traditionally were using a optical breadboard, you aimed them for center give or take. Lumia media requires some positioning gear, it has "sweet" spots.
    Plus some times the lumia is repeatable enough that you want move things around from show to show.

    Steve

  8. #78
    mixedgas's Avatar
    mixedgas is offline Creaky Old Award Winning Bastard Technologist
    Infinitus Excellentia Ion Laser Dominatus
    Join Date
    May 2007
    Location
    A lab with some dripping water on the floor.
    Posts
    10,119

    Default

    And now for something completely Different:

    Quasi lumina

    If we have any domeheads out there, I'd like to pay homage to something I saw in like 1984 or so in the Bishop Planetarium in Bradenton Florida.

    Its is cool effect on dome, and with high power leds today, it has some real potential for a comeback.

    Now this came from a really creative dome head, a guy who did some really great shows. In fact , the only laser shows my Dad would sit through 4 times in a row. And keep in mind we didn't have CGI and full Dome Evens and Sutherland back then. I mean the show was running off AppleDacs, which was probably almost pre-pangolin.

    A guy who, when doing a show to "I love the Rainy Nights" had his staff run through the isles draped in black with windex bottles set up to mist the attendees with water. The guy would also turn the Spitz projector on its "side" so both the north and south hemispheres were level with the horizon, turn on both lights, and then disengage the speed limit on the rotation axis , and spin the stars around the dome at mach 1.


    So...

    You take your mark one mod zero kitchen strainer, preferably the old 10 inch dome with punched holes type, and you mount a bright point light source in the middle, ie small halogen lamp with a tiny filament. Today I'd use luxeon star leds, but those were only a dream back then.

    You then put it on a lazy susan with a small motor, and put 5 of the things around the dome. One of them down low almost on the floor, more about that later.

    Its not a moonflower, call it a domeflower.

    WOW, hundreds of dots dancing over the dome. Modulated to the music of course. With forward and reverse manually on every 4th beat. And you can make it in the garage with hardware store parts. Lazy susan ball bearings are about 20$. HINT, the light doesn't spin!

    Then , towards the finale part of the show, you light them up and hit the fog. Because the spots are fuzzy, you get a different effect then the sharp laser beams.

    Oh, I'd love to see that one again, great showmanship, but its been replaced with full dome video.

    Steve
    Last edited by mixedgas; 01-23-2009 at 06:26.

  9. #79
    Join Date
    Dec 2006
    Location
    denver,co
    Posts
    1,078

    Default

    [\Edit* After re reading your description my below description is not what you were talking about. At gates we used mirror balls for that basic effect. We had 4 of them around the dome and hit them with narrow beam specials.

    As for the full dome video. They did that here too. It looks awesome and and is super high tech Sgi super computers and all. But it just doesn't have that special feel that the 'stoner' laser shows used to have.
    */edit]


    The Vomit comet.

    A friend of mine has the rebuilt spitz here in denver from gates planetarium. I got the (zap) tesla

    I helped with the spitz rebuild, we had a minolta main star projector and the spits was the old projector. Way back when a volunteer designed the mechanicals to hold the hemispheres I found the arc lamps and did all of the control. It was an awesome effect and really hard to describe to people who haven't actually witnessed it. It got it's name for a reason.

    It is an effect that really needs the total control type of an enviroment like the dome. I borrowed it many years ago for a rave and it worked ok but it was not dark enough to get the full effect.

    As for your idea I think that the collender holes are going to be too big. That and the 1x1mm die might be too big to be a point source too. I found that fat beams didn't provide the effect wanted. It had to be skinny beams.

    Any how this is another thing that is on my sortof kindof thinking about making. I have lots of cool old school effects but all of them take a bunch of time and money and I don't know if there is enough of a market to justify the work and recoup the investment.

    chad
    Last edited by chad; 01-23-2009 at 12:49.


    When the going gets weird, the weird turn pro.


  10. #80
    Join Date
    Nov 2008
    Location
    San Marcos, Texas, USA
    Posts
    144

    Default I want one!

    Quote Originally Posted by mixedgas View Post
    If you live in Ohio, Pat Cataan's have a similar huge diamond for about 3-5$. Not quite waterford, but OK.

    If need be, I can become Steve's discount diamonds for a one time group buy, IF they still have them.

    costs would be whatever PCs is getting for the stone plus 1.75 for the box plus 4.50 for the postage plus about 3$ for shipping materials plus 1$ for gas.

    Steve
    Count me in, PM me where to send the $$$$ - Tim

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •