Cool, well that should work just fine, who made the DAC you're using? Is there a website for it?
Gotta admit, you had me worried, I tested each breakout board for problems before I ship them, but after reading the first post, I ran over and tested a breakout board to make sure I had the pinouts corrects!
I see an "output setting" option and a track and projector mapping option. Anything under either of them?
Mamba and the USB box is from Medialas.de
![]()
Hmm, I don't see anything in there that jumps out as being a problem. How about this, with the breakout board removed from the DAC, if you try to display a red circle you get output on pins 6 and 7 instead of pin 5?
Wow, that's interesting. Ok, there has to be a palette setting somewhere in Mamba. Right now it's just outputting to all lines instead of the individual RGB lines. I know it Panoglin you can do this as well and it's easy to change. I'm not familiar enough with Mamba to know how to do it. I found the user manual on the medialas website, I'll take a look and see if I can find anything.
and if i use a fade in or fade out effect in a Blue circle the green is also fading out and in. would think it was connected on the same output what is wrong
Well I downloaded and installed the demo of mamba black, there really isn't much there to configure. Are there any settings on the USB box?