Page 2 of 4 FirstFirst 1234 LastLast
Results 11 to 20 of 35

Thread: Record Breaking 38 Watt Full Color Laser

  1. #11
    Join Date
    Dec 2006
    Location
    Essex, UK
    Posts
    8,647

    Default

    i give me left testical for that scannner
    Eat Sleep Lase Repeat

  2. #12
    mixedgas's Avatar
    mixedgas is offline Creaky Old Award Winning Bastard Technologist
    Infinitus Excellentia Ion Laser Dominatus
    Join Date
    May 2007
    Location
    A lab with some dripping water on the floor.
    Posts
    10,114

    Default

    Hint, its simpler then you think. Notice the source ring has a constant diameter. Those photos are looking into or toward the source.

    Then think, how would you do a down cone around a performer on stage without using galvos if you had access to a machine shop and hollow shafts and slip rings.

    google slip ring or slip rings and generator

    I'm shocked they will get a patent on that, it has been done before with a single spinning arm.

    Still a beautiful effect

    Steve
    Last edited by mixedgas; 05-10-2009 at 09:46.
    Qui habet Christos, habet Vitam!
    I should have rented the space under my name for advertising.
    When I still could have...

  3. #13
    mixedgas's Avatar
    mixedgas is offline Creaky Old Award Winning Bastard Technologist
    Infinitus Excellentia Ion Laser Dominatus
    Join Date
    May 2007
    Location
    A lab with some dripping water on the floor.
    Posts
    10,114

    Default

    Quote Originally Posted by andy_con View Post
    i give me left testical for that scannner

    You can have a similar one tomarrow if you know a good machinist.

    Steve
    Qui habet Christos, habet Vitam!
    I should have rented the space under my name for advertising.
    When I still could have...

  4. #14
    Join Date
    Dec 2007
    Location
    Nottingham, UK
    Posts
    2,849

    Default

    Quote Originally Posted by mixedgas View Post
    Hint, its simpler then you think. Notice the source ring has a constant diameter. Those photos are looking into or toward the source.

    Then think, how would you do a down cone around a performer on stage without using galvos if you had access to a machine shop and hollow shafts and slip rings.

    google slip ring or slip rings and generator

    I'm shocked they will get a patent on that, it has been done before with a single spinning arm.

    Still a beautiful effect

    Steve
    So...
    Would I be right in thinking a ring / thin cylinder with a reflective (perhaps chamfered) edge would be used, keep that rotating, and slowly vary the angle of incidence of the beam.
    This would make said cone or variable angle right?

    But I don't get how the cone sometimes curves near the point. Is this an artefact due to the camera? or am I still missing something...

    Many Thanks,
    Dan

  5. #15
    mixedgas's Avatar
    mixedgas is offline Creaky Old Award Winning Bastard Technologist
    Infinitus Excellentia Ion Laser Dominatus
    Join Date
    May 2007
    Location
    A lab with some dripping water on the floor.
    Posts
    10,114

    Default

    Quote Originally Posted by danielbriggs View Post
    So...
    Would I be right in thinking a ring / thin cylinder with a reflective (perhaps chamfered) edge would be used, keep that rotating, and slowly vary the angle of incidence of the beam.
    This would make said cone or variable angle right?

    But I don't get how the cone sometimes curves near the point. Is this an artefact due to the camera? or am I still missing something...

    Many Thanks,
    Dan

    add some motion at the tips of your spinning ring. the curving is a lens artifact.

    getting there?

    Steve
    Qui habet Christos, habet Vitam!
    I should have rented the space under my name for advertising.
    When I still could have...

  6. #16
    Join Date
    Dec 2007
    Location
    Nottingham, UK
    Posts
    2,849

    Default

    Quote Originally Posted by mixedgas View Post
    add some motion at the tips of your spinning ring. the curving is a lens artifact.

    getting there?

    Steve
    So the ring would also oscillate laterally as well as spinning? To give it that 'wobble' shown in the video?
    Would the ring be a single continuos face or many smaller faceted flats. I noticed that there is a break in the projection.

    Still... a very clever idea

    Dan

  7. #17
    mixedgas's Avatar
    mixedgas is offline Creaky Old Award Winning Bastard Technologist
    Infinitus Excellentia Ion Laser Dominatus
    Join Date
    May 2007
    Location
    A lab with some dripping water on the floor.
    Posts
    10,114

    Default

    Oh, and I bet its legal for audience scanning, or close to legal

    Otherwise why do it?

    Steve
    Last edited by mixedgas; 05-10-2009 at 10:37.
    Qui habet Christos, habet Vitam!
    I should have rented the space under my name for advertising.
    When I still could have...

  8. #18
    Join Date
    Dec 2007
    Location
    Nottingham, UK
    Posts
    2,849

    Default

    Quote Originally Posted by mixedgas View Post
    I'm not sure how many based on that picture, but individual mirrors on pivots as fawcetts, pehaps on a galvo or servo. The classical arrangement is a arm on a hollow shaft with a 45' fold mirror on the shaft center, that runs the beam along the arm to another fixed fold mirror at the end that aims it out. The innovation is the moving fold mirrors on the outside.

    Steve
    Cheers Steve, much clearer now.

    Many Thanks,
    Dan

  9. #19
    Join Date
    May 2007
    Location
    Austria/Vienna
    Posts
    310

    Default

    Hello!
    16W green to 15W 642nm red is a nice yellow, but still, 7W 445nm blue is not enought for balance.
    Normal for a real white balance its ~ 1:1:1 RGB with 642nm red 532nm green and 445nm blue.
    So still it should be arround ~21Watts.
    Greets,
    Phil

  10. #20
    Join Date
    Apr 2007
    Location
    Toronto Canada
    Posts
    1,120

    Default

    Quote Originally Posted by gottaluvlasers View Post

    Could you freaking imagine?? i would give my left ear for that!!!!!!!!!!

    -Marc
    If I remember correctly it's about ~150K$
    I hired an Italian guy to do my wires. Now they look like spaghetti!

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •