SWEET!!Nice Work Mo! Can't wait to check that sucker out at SELEM.
SWEET!!Nice Work Mo! Can't wait to check that sucker out at SELEM.
Nice and compact.
Just one thing; the laser head that is mounted upside down could use a heatsink, as it would normally shed it's heat through the optical table.
Doc's website
The Health and Safety Act 1971
Recklessly interfering with Darwin’s natural selection process, thereby extending the life cycle of dim-witted ignorami; thus perpetuating and magnifying the danger to us all, by enabling them to breed and walk amongst us, our children and loved ones.
Thank you Ben!That is one tiny box! Compare it to my "3-times the size, 1/2 the power" projector right behind it!
I dunno man... you think you can fit it in there? I suppose I can put it at the bottom of the optical place and pass the beam right through the plate into the optical path...
You really have no idea how much EASIER it becomes to setup and watch a show when you don't have to rent a forklift to carry the projector!!!
Thank you Laser Zone...
... unfortunately, most of it was done by hand... You wanna split the cost of a haas?
Just what he said...It was right between my "EMBLEM" and your projector... I guess a lot of
was going on?
Unfortunately I don't think I'll be taking this one to SELEM (even though I'd love to!). I have to send it out to Yobresal as he is the rightful owner of this beauty...
Thank you very much Randy! That extrusion stuff is "the bees knees"You simply cannot go wrong using it... It makes mounting the sides, innards, and framing the thing a piece of cake... now if only I had a cnc mill, the rest of it would have been just as good!
Hey man... get off the keyboard and let's get that project on the road! (just a friendly nudge)In all honesty, I can't take credit for the extrusion stuff... We've been using it at work for a while now... which is where I got my inspiration. We've built things with it that would have taken ages to complete in no time flat! Ya... this stuff is amazing!
Thank you! I really hope this is how you would have liked it. Please let me know if there anything you'd like to add/change
If you can convince Yobresal to make it... this baby will be there (unless he's going to be super nice and let me keep it another month (no, not really... I can't hold it hostage for that long)...
Thank you Doc. I really did not think of that, but I do have about 1.5 inches available on top of the module... I'll come up with a solution tonight!
Thank you all very much for all the kind words and your generous comments. Yobresal, again, I'm very glad I got the chance to work on this, thank you! Thank you for all your patience, support, and understanding. I'm sorry it took so long, but I hope the end result was worth the wait? This was really a great project and a fantastic set of lasers. I'm really sorry you have now decided to sell this thing...![]()
![]()
![]()
but to whoever ends up being the new owner of this baby... you're in for a REAL TREAT!
![]()
All in all... I started in the beginning of April... take away a couple weeks for planning, a couple weeks ordering parts... I would say my first 'work' on it started around the first week of May. It's the end of July... 3 months... that not bad, right?
Thanx;
DDL
I suffer from the Dunning–Kruger effect... daily.
Damn... that was a huge reply...
--DDL
I suffer from the Dunning–Kruger effect... daily.
I saw the projector at FLEM, but it didn't have sides on it.
A haas would be nice, but I imagine that they are significantly out of my price range!
Are those thumb screws that hold the covers in place captive? That's one tool I need to get...
Ya... it was 'naked' back then
I dunno man... A small haas is like, what, $250K tops?(must buy lotto tickets)
As about the screws... the top and bottom are help in place with hex screws... (top gives access to the optical plate) The sides use regular flat-head screws... (the one side with nothing 'built-in' allows access to the scanner amps)...
--DDL
I suffer from the Dunning–Kruger effect... daily.
Nice build Daedal, glad to see my old modules found a good home...
Mark
Nice work Mo!!
I think I'm finally ready to start on mine.
I still have your extrusion and all the other connectors/ hardware and brackets if you ever need them. Just let me know. Did you ever sell the DT's? I'm ready for a set now......
Chuck