Page 2 of 5 FirstFirst 12345 LastLast
Results 11 to 20 of 46

Thread: It's done! Finally!!

  1. #11
    Join Date
    Jun 2007
    Location
    Lake Geneva, WI.
    Posts
    2,704

    Default

    SWEET!! Nice Work Mo! Can't wait to check that sucker out at SELEM.

  2. #12
    Join Date
    Dec 2008
    Location
    Southport, UK
    Posts
    2,746

    Default

    Nice and compact.

    Just one thing; the laser head that is mounted upside down could use a heatsink, as it would normally shed it's heat through the optical table.
    http://img62.imageshack.us/img62/3985/laser.gif

    Doc's website

    The Health and Safety Act 1971

    Recklessly interfering with Darwin’s natural selection process, thereby extending the life cycle of dim-witted ignorami; thus perpetuating and magnifying the danger to us all, by enabling them to breed and walk amongst us, our children and loved ones.





  3. #13
    Join Date
    May 2007
    Location
    Orlando, FL
    Posts
    1,090

    Default

    Quote Originally Posted by Laser Ben View Post
    HOLY SHIT!!!!!!!!!


    All in that tiny box??? WOW
    Thank you Ben! That is one tiny box! Compare it to my "3-times the size, 1/2 the power" projector right behind it!
    Quote Originally Posted by allthatwhichis View Post
    What??? No blu-ray?
    I dunno man... you think you can fit it in there? I suppose I can put it at the bottom of the optical place and pass the beam right through the plate into the optical path...

    Quote Originally Posted by MechEng3 View Post
    ......as I can see that you have no real use for that thing howsa about shipping it off to me. I could use some of those black things inside of it. LOL Very nice rig! It inspires me to tear everything I have apart to get at a higher output. Maybe I need one of those Spektrum boxes......maybe sell everything and get one nice rig that works....then maybe I could learn to make a show or two.
    You really have no idea how much EASIER it becomes to setup and watch a show when you don't have to rent a forklift to carry the projector!!!

    Quote Originally Posted by Laser Zone View Post
    Nice !!! Great job chief !!
    Thank you Laser Zone...

    Quote Originally Posted by DZ View Post
    Hey daedal, very nice job! Just wondering how you did all the metal working?
    ... unfortunately, most of it was done by hand... You wanna split the cost of a haas?
    Quote Originally Posted by DZ View Post
    And will this thing be making an appearance at SELEM?!
    Quote Originally Posted by allthatwhichis View Post
    Um, you must have missed it at the last FLEM... You were there...
    Just what he said... It was right between my "EMBLEM" and your projector... I guess a lot of was going on?

    Unfortunately I don't think I'll be taking this one to SELEM (even though I'd love to! ). I have to send it out to Yobresal as he is the rightful owner of this beauty...

    Quote Originally Posted by Stuka View Post
    Awesome build, Mo!!

    I am SO going to plan on using that extruded framing for my next build - if I ever finish the first one....

    You're an inspiration, dude!!
    Thank you very much Randy! That extrusion stuff is "the bees knees" You simply cannot go wrong using it... It makes mounting the sides, innards, and framing the thing a piece of cake... now if only I had a cnc mill, the rest of it would have been just as good!

    Quote Originally Posted by buffo View Post
    I was going to say the same thing... David, it was just to the left of your projector. It's the tiny one that Mo built for Yobresal. The only difference is that it didn't have the side panels mounted yet, and some of the wiring was unfinished. But it was working...

    Really glad to hear that we'll get one more good look at that thing before it leaves your hands, Mo. It's one hell of a projector, and seriously gives the Kvant Spectrum a run for it's money!

    I agree Randy. That stuff is great. Though in fairness, Steve Roberts (Mixed gas) did suggest it first.

    I'm going to work with Mo to build a case for my touch screen out of that stuff. Maybe even make it large enough to put a small motherboard underneath so I'll have a reasonably sturdy case that would house the laser computer and the touch screen all in one...

    Adam
    Hey man... get off the keyboard and let's get that project on the road! (just a friendly nudge) In all honesty, I can't take credit for the extrusion stuff... We've been using it at work for a while now... which is where I got my inspiration. We've built things with it that would have taken ages to complete in no time flat! Ya... this stuff is amazing!

    Quote Originally Posted by yobresal View Post
    Wow!!! Nice work. Looks damn sexy, and such a small package. You are a talented person.
    Thank you! I really hope this is how you would have liked it. Please let me know if there anything you'd like to add/change

    Quote Originally Posted by 300EVIL View Post
    SWEET!! Nice Work Mo! Can't wait to check that sucker out at SELEM.
    If you can convince Yobresal to make it... this baby will be there (unless he's going to be super nice and let me keep it another month (no, not really... I can't hold it hostage for that long)...

    Quote Originally Posted by Doc View Post
    Nice and compact.

    Just one thing; the laser head that is mounted upside down could use a heatsink, as it would normally shed it's heat through the optical table.
    Thank you Doc. I really did not think of that, but I do have about 1.5 inches available on top of the module... I'll come up with a solution tonight!



    Thank you all very much for all the kind words and your generous comments. Yobresal, again, I'm very glad I got the chance to work on this, thank you! Thank you for all your patience, support, and understanding. I'm sorry it took so long, but I hope the end result was worth the wait? This was really a great project and a fantastic set of lasers. I'm really sorry you have now decided to sell this thing... but to whoever ends up being the new owner of this baby... you're in for a REAL TREAT!

    All in all... I started in the beginning of April... take away a couple weeks for planning, a couple weeks ordering parts... I would say my first 'work' on it started around the first week of May. It's the end of July... 3 months... that not bad, right?

    Thanx;
    DDL
    I suffer from the Dunning–Kruger effect... daily.

  4. #14
    Join Date
    May 2007
    Location
    Orlando, FL
    Posts
    1,090

    Default

    Damn... that was a huge reply...

    --DDL
    I suffer from the Dunning–Kruger effect... daily.

  5. #15
    Join Date
    May 2006
    Location
    Native Floridian
    Posts
    3,145

    Default

    I saw the projector at FLEM, but it didn't have sides on it.

    A haas would be nice, but I imagine that they are significantly out of my price range!

    Are those thumb screws that hold the covers in place captive? That's one tool I need to get...

  6. #16
    Join Date
    May 2007
    Location
    Orlando, FL
    Posts
    1,090

    Default

    Quote Originally Posted by DZ View Post
    I saw the projector at FLEM, but it didn't have sides on it.

    A haas would be nice, but I imagine that they are significantly out of my price range!

    Are those thumb screws that hold the covers in place captive? That's one tool I need to get...
    Ya... it was 'naked' back then

    I dunno man... A small haas is like, what, $250K tops? (must buy lotto tickets)

    As about the screws... the top and bottom are help in place with hex screws... (top gives access to the optical plate) The sides use regular flat-head screws... (the one side with nothing 'built-in' allows access to the scanner amps)...

    --DDL
    I suffer from the Dunning–Kruger effect... daily.

  7. #17
    Join Date
    Aug 2007
    Location
    Under a rock in Cambridge UK
    Posts
    1,353

    Default

    Nice build Daedal, glad to see my old modules found a good home...

    Mark

  8. #18
    Join Date
    May 2007
    Location
    Orlando, FL
    Posts
    1,090

    Default

    Quote Originally Posted by Insanity View Post
    Nice build Daedal, glad to see my old modules found a good home...

    Mark
    Thanx Mark

    That 635 sure did get a makeover!

    --DDL
    I suffer from the Dunning–Kruger effect... daily.

  9. #19
    Join Date
    Jan 2009
    Location
    Wellsboro, PA
    Posts
    71

    Default

    Nice work Mo!!

    I think I'm finally ready to start on mine.
    I still have your extrusion and all the other connectors/ hardware and brackets if you ever need them. Just let me know. Did you ever sell the DT's? I'm ready for a set now......

    Chuck

  10. #20
    Join Date
    May 2007
    Location
    Orlando, FL
    Posts
    1,090

    Default

    Quote Originally Posted by CRFultz View Post
    Nice work Mo!!

    I think I'm finally ready to start on mine.
    I still have your extrusion and all the other connectors/ hardware and brackets if you ever need them. Just let me know. Did you ever sell the DT's? I'm ready for a set now......

    Chuck
    PM Sent...

    --DDL
    I suffer from the Dunning–Kruger effect... daily.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •