I might be able to enter, but it would be for the laser only, it would ultimately be paired with some homebrew galvos my friend is working on.
In any case, my current best is this little guy:
Attachment 15467Attachment 15468Attachment 15466
The main project was the laser head, the projector was done just as an afterthought for a school project, with some $5 galvos and a microprocessor to feed them random data.
It measures 50x50x25mm (excluding the mounting feet which would expand it another 25mm), and is loaded with
red - SLD1238JL - 100mw
violet - PHR-803T - 100mw
green - Ledshopppe 50mw pointer - 60mw
So it does just about 250mw, but I used the cheapest diodes I could get my hands on. I am considering making one with dual diodes, although if I can't make the PBS cubes out of my sleds work acceptably well I may skip it and stick with the simple system.
The main issue I have is the green, I still need to try and characterize the ledshoppe modules, but as it was there was terrible jellybeaning going on, and the power was super unstable. With a tec I could at least get the power stable, but I am not sure that there is much I can do about the jellybeaning.
Has anyone done a comprehensive review of the CNI 12mm green modules? I am tempted to buy one to compare to the ledshoppe ones, but for almost $200 for a 50mw its pretty pricy (so far total cost of the project has been only slightly more than that). On that note, what is considered 'acceptable' in an application like this? Is a rise time of a ms just something you live with with DPSS?