
Originally Posted by
planters
What badger said is correct. You should also understand what is actually happening when you use the cylinders to expand the beam. The far field divergence decreases proportionally as you expand the beam in the near field. There is no free lunch and so if you want the lowest far field divergence possible then you want to expand in the near field as much as your scanners will allow. In addition to the optical aberrations caused by operating off axis as was stated by badger the side by side stacking will give you at the best a beam that is twice as wide to start and then the ratio of available expansion will be cut in half and the far field divergence will double (and furthermore, you'll never actually achieve 100% packing efficiency anyway).
Also, the most efficient use of a scanner is when the mirrors are completely filled , but without spilling over the edges. This usually will require a near square shaped beam and so this should be your goal when you are done with your beam manipulations. You can see that "ll" when expanded will be an a squat rectangle and will leave a large part of the scanner mirror empty.