
Originally Posted by
laserist
It's important to remember it was a long time ago. The DOG programing was done real close to the bare metal. The first computer at Laser Images was a six board wire wrapped masters thesis project. Having some junk in the unaddressed space wasn't because they put it there - they just didn't take it out.
The first digital image Laser Images did (Laserium) was "digitized" on graph paper and manually converted to hex to write the file to burn the EPROM.
Yes sir, I just re-read my John Bell Engineering, Inc 2716 EPROM Programmer manual (to fact check myself and my old recollections) which states that any memory location within the 2K data range to be written that is not to be overwritten should be filled with FF. So it was possible to only write to certain places when re-coding the 2716. This is the only EPROM programmer that I'm familiar with so other EPROM programmers probably did the same thing.
I may have had a 110VAC UV light bulb although I don't remember its been so long ago. I seem to recall using a standard 60W light bulb goose neck lamp placed close to the EPROM window for about 20-30 minutes (or maybe less).
The first 4 or 5 digital images I did were also drawn points on a 255 x 255 grid paper and converted to hex and manually typed into Apple II's memory, then save to floppy.
________________________________
Everything depends on everything else